Agilent - ICP Supplies - Spectroscopy - Lab supplies

Agilent Inductively Coupled Plasma Mass Spectrometry (ICP-MS) is available in single quadrupole and triple quadrupole configurations. Our single quadrupole ICP-MS address the range of typical ICP-MS measurements from routine, regulated analysis to advanced research and demanding applications. Our triple quadrupole ICP-MS will give you the confidence of knowing you can resolve problematic interferences – even in your most difficult samples – delivering results you know you can trust.

Catalog No.		Product	Net Price
	AGIL3710037800	Tubing, Tygon, 6.4 mm id, 1.6 mm wall, spray chamber outlet to torch. Connects from sample outlet on spray chamber to torch, recommended for low volatile organic samples, per meter	26	Add to Cart
Inner Diameter (ID) 6.4 mm Length 1 m UNSPSC Code 41113000 Chemical Compatibility Aqueous Low volatile organics Notes Connects sample tray to waste container Tubing Material Tygon Tubing OD 1.6 mm
	AGIL9910070400	Spray chamber, cooled, double-pass, cyclonic, glass, with cooling gallery for highly volatile organic solvents. Includes mounting bracket for Liberty Series I/II, Vista and 700 series ICP-OES instruments; requires, but does not include, a refrigerated wat	1409	Add to Cart
UNSPSC Code 41115411 Chemical Compatibility Aqueous Organic solvents Material Borosilicate Glass Type Double pass
	G8014-68002	Inert spray chamber for 5000 series ICP-OES and MP-AES. Double pass design with removable baffle and ball joint outlet. Recommended for HF digests, high TDS, and wear metal samples.	1760	Add to Cart
UNSPSC Code 41113000 Chemical Compatibility Aqueous HF acid Organic solvents Material PET Type Double pass
	AGIL8003-0330	Spray chamber, Twister, double-pass, borosilicate glass, cyclonic with Helix nebulizer seal, 50 mL, O-ring-free, for Optima 2x00/4x00/5x00/7x00/8x00	786	Add to Cart
UNSPSC Code 41122000 Chemical Compatibility Aqueous Organic solvents Material Borosilicate Glass Type Double pass
	AGIL8003-0333	Drain cap assembly, for drain bottle assembly	388	Add to Cart
UNSPSC Code 41115400
	AGIL8003-0457	Spray chamber drain fitting with tubing and drain, for Optima 2x00/4x00/5x00/7x00/8x00. Spray chamber drain fitting with tubing and drain adapter, to pump out waste solution through spray chamber drain (does not include peristaltic pump tubing).	224	Add to Cart
UNSPSC Code 41115400
	AGIL8003-0463	End cap O-ring, for spray chamber with type A/C/K nebulizers, for Optima 5/7/8x00	9	Add to Cart
UNSPSC Code 41115400 Where Used Spray Chamber
	AGIL8003-0817	Multimode Sample Introduction System (MSIS), for Optima 2x00/4x00/5x00/7x00/8x00	3142	Add to Cart
UNSPSC Code 41122000 Chemical Compatibility Aqueous Material Borosilicate Glass Type MSIS
	AGIL2010081700	Spray chamber, single-pass, glass, cyclonic, for axial 700 series and Liberty ICP-OES. Reccomended for routine aqeous samples where best signal to noise performance is required. Requires mounting bracket.	636	Add to Cart
UNSPSC Code 41115411 Chemical Compatibility Aqueous Material Borosilicate Glass Notes Needs mounting bracket Type Single pass
	AGIL7910043700	Spray chamber, double-pass, glass cyclonic, for ICP-OES with organic solvents, high matrix, high total dissolved solids. Requires mounting bracket.	835	Add to Cart
UNSPSC Code 41115411 Chemical Compatibility Aqueous Organic solvents Material Borosilicate Glass Notes Needs mounting bracket Type Double pass

<< 25 26 27 28 293031 32 33 34 35 >>

Overview

ICP-MS system operates with an ICP-MS Nebulizer, in which a high velocity Argon gas stream meets a liquid stream causing filmwise breakup of the solution into a fine aerosol. The aerosol particle size should ideally be sub-10µm with a narrow particle size distribution to achieve efficient atomization and ionization. Agilent offers a comprehensive range of ICP-MS nebulizers and supplies to solve any ICP-MS analysis challenge.

The portfolio includes standard glass concentric nebulizer (MicroMist), quartz and inert PFA nebulizers (MicroFlow and C-Flow), as well as robust Mira Mist PEEK or PTFE for high TDS samples and low-flow self-aspirating or total consumption nebulizers for your clinical or limited volume samples. ICP-MS nebulizer support is provided with a full range of accessories for all models including nebulizer cleaning tools.

The ICP torch is used to form, shape, and sustain an argon plasma which atomizes and ionizes the sample aerosol. Agilent ICP-MS Torches with Shield Torch System (STS) provide precise ion energy control, ensuring high sensitivity and stability, even in cool plasma mode for effective interference removal (ArO+).

Our portfolio is comprised of a wide range of ICP torches for your specific ICP-MS configuration. One-piece quartz torches offer the best stability and ease of use. The large 2.5mm injector on the standard torch gives maximum robustness and lowest matrix interferences for the best plasma stability. Single-piece torches with narrow bore injectors (1.0mm or 1.5 mm) are designed for use with organic solvents, to reduce plasma loading and improve plasma stability. Optional semi-demountable quartz torches with removable platinum or sapphire injectors are also available for use with the PFA inert sample introduction kit.

Resources

Agilent Spectroscopy Supplies: Your Essential Resource for Spectroscopy

Spare Parts and Supplies Kits for Agilent ICP-MS flyer

Agilent ICP-MS Platinum Cone trade-in program flyer

Related Categories