+852-3069 6950
css@gugent.com.hk
Agilent Inductively Coupled Plasma Mass Spectrometry (ICP-MS) is available in single quadrupole and triple quadrupole configurations. Our single quadrupole ICP-MS address the range of typical ICP-MS measurements from routine, regulated analysis to advanced research and demanding applications. Our triple quadrupole ICP-MS will give you the confidence of knowing you can resolve problematic interferences – even in your most difficult samples – delivering results you know you can trust.
| Catalog No. | Product | Net Price | |||
|---|---|---|---|---|---|
| G8400-67150 | Quartz Spray chamber, Scott double-pass, standard for Agilent 7850, 7900 and 8900 with UHMI. For use with UHMI or no aerosol gas dilution by plugging Argon dilution gas port on spray chamber outlet. Requires End Cap G3280-60008 | 790 | |||
|
|||||
| AGIL8003-0496 | PerkinElmer, Connector, EzyLok, for jacketed spray chamber. Suitable for PerkinElmer ICP-MS | 109 | |||
|
|||||
| AGIL8003-0501 | PerkinElmer, Spray chamber drain fitting 0.030 inch id, 0.062 inch od, 24 inch. Suitable for PerkinElmer ICP-MS | 24 | |||
|
|||||
| AGIL8003-0514 | Spray chamber, baffled, glass, cyclonic, with ball joint, for ball-joint injectors, for NexION | 647 | |||
|
|||||
| AGIL8003-0515 | Spray chamber, baffled, glass, cyclonic, with ball joint, for ELAN DRC/DRC Plus/DRC II | 827 | |||
|
|||||
| AGIL8003-0516 | PerkinElmer, O-ring, for baffled quartz cyclonic spray chamber (PTFE O-ring type) with ball joint. Suitable for ELAN 9000/6xX00/DRC and NexION | 3 | |||
|
|||||
| AGIL8003-0517 | Spray chamber, high purity, quartz, cyclonic, O-ring-free, for NexION | 1478 | |||
|
|||||
| AGIL8003-0518 | Spray chamber, borosilicate glass, cyclonic, O-ring-free, for NexION | 1010 | |||
|
|||||
| AGIL8003-0519 | Spray chamber, 7 mm baffle, quartz, cyclonic, with auxiliary gas port and drain line, connects directly to ESI injectors, for ELAN | 1125 | |||
|
|||||
| AGIL8003-0520 | Spray chamber, glass, cyclonic, O-ring-free, for ELAN 9000/6xX00/DRC/NexION | 730 | |||
|
|||||
ICP-MS system operates with an ICP-MS Nebulizer, in which a high velocity Argon gas stream meets a liquid stream causing filmwise breakup of the solution into a fine aerosol. The aerosol particle size should ideally be sub-10µm with a narrow particle size distribution to achieve efficient atomization and ionization. Agilent offers a comprehensive range of ICP-MS nebulizers and supplies to solve any ICP-MS analysis challenge.
The portfolio includes standard glass concentric nebulizer (MicroMist), quartz and inert PFA nebulizers (MicroFlow and C-Flow), as well as robust Mira Mist PEEK or PTFE for high TDS samples and low-flow self-aspirating or total consumption nebulizers for your clinical or limited volume samples. ICP-MS nebulizer support is provided with a full range of accessories for all models including nebulizer cleaning tools.
The ICP torch is used to form, shape, and sustain an argon plasma which atomizes and ionizes the sample aerosol. Agilent ICP-MS Torches with Shield Torch System (STS) provide precise ion energy control, ensuring high sensitivity and stability, even in cool plasma mode for effective interference removal (ArO+).
Our portfolio is comprised of a wide range of ICP torches for your specific ICP-MS configuration. One-piece quartz torches offer the best stability and ease of use. The large 2.5mm injector on the standard torch gives maximum robustness and lowest matrix interferences for the best plasma stability. Single-piece torches with narrow bore injectors (1.0mm or 1.5 mm) are designed for use with organic solvents, to reduce plasma loading and improve plasma stability. Optional semi-demountable quartz torches with removable platinum or sapphire injectors are also available for use with the PFA inert sample introduction kit.
Agilent Spectroscopy Supplies: Your Essential Resource for Spectroscopy
Spare Parts and Supplies Kits for Agilent ICP-MS flyer
Agilent ICP-MS Platinum Cone trade-in program flyer
