+852-3069 6950
css@gugent.com.hk
Agilent Inductively Coupled Plasma Mass Spectrometry (ICP-MS) is available in single quadrupole and triple quadrupole configurations. Our single quadrupole ICP-MS address the range of typical ICP-MS measurements from routine, regulated analysis to advanced research and demanding applications. Our triple quadrupole ICP-MS will give you the confidence of knowing you can resolve problematic interferences – even in your most difficult samples – delivering results you know you can trust.
| Catalog No. | Product | Net Price | |||
|---|---|---|---|---|---|
| AGIL1510256900 | Super flangeless nut, PEEK short headless, 1/4-28 flat-bottom for 1/16 in od tubing for SVS1+/2+ | 25 | |||
|
|||||
| AGIL2410020500 | Tubing, capillary, nebulizer, for ketone-based organic samples, per m | 9 | |||
|
|||||
| AGIL2410023800 | Silicone tubing, 3/16 in id x 5/16 in od, per meter, for 700 Series, Vista Series, and Liberty ICP-OES. Also used as pump tubing for the Routine Sampler Accessory used with the Cary 100/300 | 35 | |||
|
|||||
| AGIL3710037800 | Tubing, Tygon, 6.4 mm id, 1.6 mm wall, spray chamber outlet to torch. Connects from sample outlet on spray chamber to torch, recommended for low volatile organic samples, per meter | 26 | |||
|
|||||
| AGIL6810010000 | Large argon filter, charcoal, externally mounted, for polychrmator gas line. | 218 | |||
|
|||||
| AGIL0100-1690 | 1/16' Ferrule, PEEK w/SST Locking Ring | 31 | |||
|
|||||
| G1820-65541 | Basic LC-ICP-MS connection kit for speciation analysis using HPLC-ICP-MS. Includes PFA sample tubing, 0.3 mm id, 1.6 mm od, 3 m, 2 unions, PEEK fittings 1/16 inch x 10-32 male nut, 3 x 2/pk, APG remote cable, gender changer connector D9S-FF | 720 | |||
|
|||||
| G1833-65513 | Plate bias, used with series 7500 ICP-MS systems, model 7500c | Special offer | |||
|
|||||
| G1833-65562 | Plate bias, used with series 7500 ICP-MS systems, model 7500c | 367 | |||
|
|||||
| G3158-80024 | 3-Way Manual Valve | 870 | |||
|
|||||
ICP-MS system operates with an ICP-MS Nebulizer, in which a high velocity Argon gas stream meets a liquid stream causing filmwise breakup of the solution into a fine aerosol. The aerosol particle size should ideally be sub-10µm with a narrow particle size distribution to achieve efficient atomization and ionization. Agilent offers a comprehensive range of ICP-MS nebulizers and supplies to solve any ICP-MS analysis challenge.
The portfolio includes standard glass concentric nebulizer (MicroMist), quartz and inert PFA nebulizers (MicroFlow and C-Flow), as well as robust Mira Mist PEEK or PTFE for high TDS samples and low-flow self-aspirating or total consumption nebulizers for your clinical or limited volume samples. ICP-MS nebulizer support is provided with a full range of accessories for all models including nebulizer cleaning tools.
The ICP torch is used to form, shape, and sustain an argon plasma which atomizes and ionizes the sample aerosol. Agilent ICP-MS Torches with Shield Torch System (STS) provide precise ion energy control, ensuring high sensitivity and stability, even in cool plasma mode for effective interference removal (ArO+).
Our portfolio is comprised of a wide range of ICP torches for your specific ICP-MS configuration. One-piece quartz torches offer the best stability and ease of use. The large 2.5mm injector on the standard torch gives maximum robustness and lowest matrix interferences for the best plasma stability. Single-piece torches with narrow bore injectors (1.0mm or 1.5 mm) are designed for use with organic solvents, to reduce plasma loading and improve plasma stability. Optional semi-demountable quartz torches with removable platinum or sapphire injectors are also available for use with the PFA inert sample introduction kit.
Agilent Spectroscopy Supplies: Your Essential Resource for Spectroscopy
Spare Parts and Supplies Kits for Agilent ICP-MS flyer
Agilent ICP-MS Platinum Cone trade-in program flyer
