+852-3069 6950
css@gugent.com.hk
 

Agilent Inductively Coupled Plasma Mass Spectrometry (ICP-MS) is available in single quadrupole and triple quadrupole configurations. Our single quadrupole ICP-MS address the range of typical ICP-MS measurements from routine, regulated analysis to advanced research and demanding applications. Our triple quadrupole ICP-MS will give you the confidence of knowing you can resolve problematic interferences – even in your most difficult samples – delivering results you know you can trust.

Catalog No. Product Net Price
AGIL3710068300 Peristaltic pump tubing, PVC, orange/green tabs, flared ends, 0.38 mm id), for aqueous samples, 12/pk 72 
Add to Cart
  • Inner Diameter (ID)
  • 0.38 mm
  • Length
  • 450 mm
  • UNSPSC Code
  • 40183000
  • Chemical Compatibility
  • Aqueous HF acid
  • Flared
  • Yes
  • Number of Stops
  • 2
  • Stop Color
  • Orange/Green
  • Tubing Material
  • PVC
AGIL3710068500 Peristaltic pump tubing, Santoprene, orange/green tabs, flared ends, 0.38 mm id, for ketone-based organic samples, 12/pk 246 
Add to Cart
  • Inner Diameter (ID)
  • 0.38 mm
  • Length
  • 450 mm
  • UNSPSC Code
  • 40183000
  • Chemical Compatibility
  • Ketone solvents
  • Flared
  • Yes
  • Number of Stops
  • 2
  • Stop Color
  • Orange/Green
  • Tubing Material
  • Marprene
AGIL3710068700 Peristaltic pump tubing, FPM, orange/green tabs, flared ends , 0.38 mm id, for aromatic organic samples, 12/pk 271 
Add to Cart
  • Inner Diameter (ID)
  • 0.38 mm
  • Length
  • 175 mm
  • UNSPSC Code
  • 40183000
  • Chemical Compatibility
  • Aromatic organics
  • Flared
  • Yes
  • Number of Stops
  • 2
  • Stop Color
  • Orange/Green
  • Tubing Material
  • FPM fluoroelastomer polymer
G8003-67003 Organic peristaltic pump tubing kit, for Agilent MP-AES 168 
Add to Cart
  • Length
  • 450 mm
  • UNSPSC Code
  • 41113000
  • Chemical Compatibility
  • Aromatic organics
  • Flared
  • No
  • Number of Stops
  • 2
  • Tubing Material
  • Solvaflex
AGIL8003-0459 Peristaltic pump tube, PVC, red/red, 2-stop, for drain, 12/pk. Suitable for all aqueous solutions, medium-concentrated acids and bases. 35 
Add to Cart
  • Inner Diameter (ID)
  • 1.14 mm
  • Length
  • 450 mm
  • UNSPSC Code
  • 41122000
  • Chemical Compatibility
  • Aqueous HF acid
  • Flared
  • No
  • Number of Stops
  • 2
  • Stop Color
  • Red/Red
  • Tubing Material
  • PVC
G3285-80024 PFA Connector, spray chamber to torch, long without gas port, for inert sample introduction kit. Suits Agilent 7700, 7800, 7850, 7900, 8800, 8900 ICP-MS with PFA inert kit. Not compatible with HMI / UHMI aerosol gas dilution or option gas for organic solv 591 
Add to Cart
  • UNSPSC Code
  • 41115411
G4912-80016 PFA Connector, spray chamber to torch, long with gas port, for inert sample introduction kit. Suits Agilent 7700, 7800, 7850, 7900, 8800, 8900 ICP-MS using option gas for organic analysis with PFA inert kit 1711 
Add to Cart
  • UNSPSC Code
  • 41115717
AGIL8003-0560 PerkinElmer ICP-MS Power amplifier tube, ceramic, for NexION/ELAN 9000/6x00/DRCs and ELAN 5000 manufactured after September 1992 1080 
Add to Cart
  • UNSPSC Code
  • 41122000
AGIL1510220200 Finger nut for ICP-OES pre-optics cone 49 
Add to Cart
AGIL8110002800 Esteele cleaning powder, for cleaning interface cone for ICP-OES 41 
Add to Cart
  • UNSPSC Code
  • 41115411
  • Notes
  • For cleaning interface cone on axially-viewed ICP-OES

Overview

ICP-MS system operates with an ICP-MS Nebulizer, in which a high velocity Argon gas stream meets a liquid stream causing filmwise breakup of the solution into a fine aerosol. The aerosol particle size should ideally be sub-10µm with a narrow particle size distribution to achieve efficient atomization and ionization. Agilent offers a comprehensive range of ICP-MS nebulizers and supplies to solve any ICP-MS analysis challenge.

The portfolio includes standard glass concentric nebulizer (MicroMist), quartz and inert PFA nebulizers (MicroFlow and C-Flow), as well as robust Mira Mist PEEK or PTFE for high TDS samples and low-flow self-aspirating or total consumption nebulizers for your clinical or limited volume samples. ICP-MS nebulizer support is provided with a full range of accessories for all models including nebulizer cleaning tools.


The ICP torch is used to form, shape, and sustain an argon plasma which atomizes and ionizes the sample aerosol. Agilent ICP-MS Torches with Shield Torch System (STS) provide precise ion energy control, ensuring high sensitivity and stability, even in cool plasma mode for effective interference removal (ArO+).

Our portfolio is comprised of a wide range of ICP torches for your specific ICP-MS configuration. One-piece quartz torches offer the best stability and ease of use. The large 2.5mm injector on the standard torch gives maximum robustness and lowest matrix interferences for the best plasma stability. Single-piece torches with narrow bore injectors (1.0mm or 1.5 mm) are designed for use with organic solvents, to reduce plasma loading and improve plasma stability. Optional semi-demountable quartz torches with removable platinum or sapphire injectors are also available for use with the PFA inert sample introduction kit.


Resources