Agilent - ICP Supplies - Spectroscopy - Lab supplies

Agilent Inductively Coupled Plasma Mass Spectrometry (ICP-MS) is available in single quadrupole and triple quadrupole configurations. Our single quadrupole ICP-MS address the range of typical ICP-MS measurements from routine, regulated analysis to advanced research and demanding applications. Our triple quadrupole ICP-MS will give you the confidence of knowing you can resolve problematic interferences – even in your most difficult samples – delivering results you know you can trust.

Catalog No.		Product	Net Price
	G3666-67401	8900 with s-lens ICP-MS skimmer cone, Platinum-tip with Copper base. Standard cone used with s-lens for aggressive acid digests, including HF and semiconductor samples. Use with Platinum sampler cone (std G3280-67036) and brass skimmer base (G3666-60401).	2511	Add to Cart
UNSPSC Code 41113000 Base Material Copper Chemical Compatibility Aqueous Organic solvents Cone Care Package No Cone Type Skimmer Lens Type s-lens Tip Material Platinum
	G3666-67501	Skimmer cone, Pt-tip, Ni base, 7900 and 8900 m-lens, 1/pk. Suitable for 7900 and 8900 ICP-MS configured with m-lens only. Recommended to use with Pt-tip, Ni-plated sampler cone G3280-67142.	2511	Add to Cart
Base Material Nickel Chemical Compatibility Aqueous Corrosive acids HF acid Strong acids Cone Care Package No Cone Type Skimmer Lens Type m-lens Tip Diameter 7.62 mm Tip Material Platinum
	G3666-67511	7900 and 8900 with m-lens ICP-MS skimmer cone, Nickel. Recommended to use with Nickel-tip with Nickel-plated Copper base sampler cone (G3280-67061) and brass skimmer base.	539	Add to Cart
UNSPSC Code 41113000 Base Material Nickel Cone Care Package No Cone Type Skimmer Tip Material Nickel
	AGIL8003-0574	Skimmer cone, nickel, 0.9 mm orifice, for ELAN 9000/6x00/DRC, not compatible with NexION	342	Add to Cart
UNSPSC Code 41122000 Cone Type Skimmer
	AGIL8003-0576	Skimmer cone, platinum, for NexION	1093	Add to Cart
UNSPSC Code 41122000 Cone Type Skimmer
	AGIL8003-0578	Skimmer cone, platinum, for ELAN 9000/6x00/DRC, not compatible with NexION	922	Add to Cart
UNSPSC Code 41122000 Cone Type Skimmer
	G1833-65200	Comprehensive LC-ICP-MS connection kit for speciation analysis using HPLC-ICP-MS. Suitable for LC-ICP-MS applications other than Cr in water and As in water/urine. This is a comprehensive pack of tubing and connectors required to set up LC-ICP-MS. Include	1237	Add to Cart
UNSPSC Code 41115411 Notes Suitable for LC-ICP-MS applications other than Cr in water and As in water/urine. This is a comprehensive pack of tubing and connectors required to set up LC-ICP-MS.Includes sample tubing (PFA, 0.15 mm id, 0.7 m, 5/pk; PTFE, 0.8 mm id, 0.5 m; PTFE, 2.0 mm id, 5 m); peristaltic pump tubing, Tygon, 3-stop, 0.89 mm id, 12/pk; T-joint, 2/pk; union joint, 5/pk; PTFE nut for 3 mm od tubing, 10/pk; front and back ferrules for 3 mm od tubing, 10/pk; PTFE nut for 1.6 mm od tubing, 10/pk; front and back ferrules for 1.6 mm od tubing, 10/pk; peri-pump tubing adapters, 2/pk; APG remote cable; gender changer connector D9S-FF; manual/setup guide Includes sample tubing (PFA, 0.15 mm id, 0.7 m, 5/pk; PTFE, 0.8 mm id, 0.5 m; PTFE, 2.0 mm id, 5 m); peristaltic pump tubing, Tygon, 3-stop, 0.89 mm id, 12/pk; T-joint, 2/pk; union joint, 5/pk; PTFE nut for 3 mm od tubing, 10/pk; front and back ferrules for 3 mm od tubing, 10/pk; PTFE nut for 1.6 mm od tubing, 10/pk; front and back ferrules for 1.6 mm od tubing, 10/pk; peri-pump tubing adapters, 2/pk; APG remote cable; gender changer connector D9S-FF; manual/setup guide -->
	G3154-65001	Speciation column for testing arsenic in drinking water by HPLC-ICP-MS. Use with guard Column for arsenic Speciation G3154-65002	2580	Add to Cart
UNSPSC Code 41115411
	G3268-80001	Speciation column for testing chromium in drinking water by HPLC-ICP-MS	1154	Add to Cart
UNSPSC Code 41115411
	G3288-80000	Speciation column for testing arsenic in urine, food, etc. by HPLC-ICP-MS. Use with guard Column for arsenic Speciation G3154-65002	3477	Add to Cart
UNSPSC Code 41115411

<< 19 20 21 22 232425 26 27 28 29 >>

Overview

ICP-MS system operates with an ICP-MS Nebulizer, in which a high velocity Argon gas stream meets a liquid stream causing filmwise breakup of the solution into a fine aerosol. The aerosol particle size should ideally be sub-10µm with a narrow particle size distribution to achieve efficient atomization and ionization. Agilent offers a comprehensive range of ICP-MS nebulizers and supplies to solve any ICP-MS analysis challenge.

The portfolio includes standard glass concentric nebulizer (MicroMist), quartz and inert PFA nebulizers (MicroFlow and C-Flow), as well as robust Mira Mist PEEK or PTFE for high TDS samples and low-flow self-aspirating or total consumption nebulizers for your clinical or limited volume samples. ICP-MS nebulizer support is provided with a full range of accessories for all models including nebulizer cleaning tools.

The ICP torch is used to form, shape, and sustain an argon plasma which atomizes and ionizes the sample aerosol. Agilent ICP-MS Torches with Shield Torch System (STS) provide precise ion energy control, ensuring high sensitivity and stability, even in cool plasma mode for effective interference removal (ArO+).

Our portfolio is comprised of a wide range of ICP torches for your specific ICP-MS configuration. One-piece quartz torches offer the best stability and ease of use. The large 2.5mm injector on the standard torch gives maximum robustness and lowest matrix interferences for the best plasma stability. Single-piece torches with narrow bore injectors (1.0mm or 1.5 mm) are designed for use with organic solvents, to reduce plasma loading and improve plasma stability. Optional semi-demountable quartz torches with removable platinum or sapphire injectors are also available for use with the PFA inert sample introduction kit.

Resources

Agilent Spectroscopy Supplies: Your Essential Resource for Spectroscopy

Spare Parts and Supplies Kits for Agilent ICP-MS flyer

Agilent ICP-MS Platinum Cone trade-in program flyer

Related Categories