+852-3069 6950
css@gugent.com.hk
Agilent Inductively Coupled Plasma Mass Spectrometry (ICP-MS) is available in single quadrupole and triple quadrupole configurations. Our single quadrupole ICP-MS address the range of typical ICP-MS measurements from routine, regulated analysis to advanced research and demanding applications. Our triple quadrupole ICP-MS will give you the confidence of knowing you can resolve problematic interferences – even in your most difficult samples – delivering results you know you can trust.
| Catalog No. | Product | Net Price | |||
|---|---|---|---|---|---|
| G3139-65106 | Nebulizer, MicroFlow, inert PFA, self-aspirates at 20-50 μL/min. For use without Agilent integrated autosampler (I-AS), for low sample volume trace analysis and hydrofluoric acid (HF), self-aspirates or can be used with instrument peristaltic pump | 2327 | |||
|
|||||
| G3161-80000 | Nebulizer, Mira Mist, PTFE, for high TDS applications with HF and Organic Solvent, suitable for all Agilent ICP-MS series. Enhanced parallel path nebulizer gives high salts and TDS capability. Suitable for all acids, including HF, and organic solvents. D | 1461 | |||
|
|||||
| G3285-80001 | Nebulizer, C-Flow with Agilent I-AS probe, inert PFA, self-aspirates at 200 μL/min. For use with Agilent integrated autosampler (I-AS), for trace analysis and hydrofluoric acid (HF), self-aspirates with integrated sample probe. Optional for all Agilent IC | 1971 | |||
|
|||||
| AGIL9910057400 | V-groove nebulizer kit, inert, for the Sturman-Masters spray chamber. Recommended for samples containing hydrofluoric acid, fusions, slurries, or >20% TDS.Includes nebulizer body, sample capillary, nebulizer gas connector, cleaning wire. | 1016 | |||
|
|||||
| G8010-60293 | OneNeb series 2 inert concentric nebulizer. Recommended for routine analysis of samples up to 25% TDS; inert construction makes it suitable for most solution types. Includes replaceable sample capillary/connector assembly, quick release connector for nebu | 948 | |||
|
|||||
| G8010-60345 | Sample inlet fitting, for OneNeb Series 2 nebulizer. Includes capillary connector with captive sample capillary tubing 0.5 mm id, 1/16 inch od, 750 mm long | 86 | |||
|
|||||
| G3285-80016 | Obsolete. No replacement recommendation. Inert sample introduction kit, 1.5 mm id sapphire injector tube, for Agilent 7500 ICP-MS, replaces standard sample introduction system with an inert system for volatile organic samples, requires but does not includ | Special offer | |||
|
|||||
| G4912-68000 | PFA Inert sample introduction kit with 2.5 mm id sapphire injector, for aqueous samples containing HF. Suits Agilent 7700, 7800, 7850, 7900, 8800, 8900 ICP-MS with PFA inert kit. Not compatible with HMI / UHMI aerosol gas dilution - order connector with g | 5692 | |||
|
|||||
| G4912-68001 | PFA Inert sample introduction kit with 2.5 mm id platinum injector, for aqueous samples containing HF. Suits Agilent 7700, 7800, 7850, 7900, 8800, 8900 ICP-MS with PFA inert kit. Not compatible with HMI / UHMI aerosol gas dilution - order connector with g | 8503 | |||
|
|||||
| G4912-68002 | PFA Inert sample introduction kit with 1.5 mm id sapphire injector, for organic samples. Suits Agilent 7700, 7800, 7850, 7900, 8800, 8900 ICP-MS with PFA inert kit. Not compatible with HMI / UHMI aerosol gas dilution. If make up and option gas are both re | 5983 | |||
|
|||||
ICP-MS system operates with an ICP-MS Nebulizer, in which a high velocity Argon gas stream meets a liquid stream causing filmwise breakup of the solution into a fine aerosol. The aerosol particle size should ideally be sub-10µm with a narrow particle size distribution to achieve efficient atomization and ionization. Agilent offers a comprehensive range of ICP-MS nebulizers and supplies to solve any ICP-MS analysis challenge.
The portfolio includes standard glass concentric nebulizer (MicroMist), quartz and inert PFA nebulizers (MicroFlow and C-Flow), as well as robust Mira Mist PEEK or PTFE for high TDS samples and low-flow self-aspirating or total consumption nebulizers for your clinical or limited volume samples. ICP-MS nebulizer support is provided with a full range of accessories for all models including nebulizer cleaning tools.
The ICP torch is used to form, shape, and sustain an argon plasma which atomizes and ionizes the sample aerosol. Agilent ICP-MS Torches with Shield Torch System (STS) provide precise ion energy control, ensuring high sensitivity and stability, even in cool plasma mode for effective interference removal (ArO+).
Our portfolio is comprised of a wide range of ICP torches for your specific ICP-MS configuration. One-piece quartz torches offer the best stability and ease of use. The large 2.5mm injector on the standard torch gives maximum robustness and lowest matrix interferences for the best plasma stability. Single-piece torches with narrow bore injectors (1.0mm or 1.5 mm) are designed for use with organic solvents, to reduce plasma loading and improve plasma stability. Optional semi-demountable quartz torches with removable platinum or sapphire injectors are also available for use with the PFA inert sample introduction kit.
Agilent Spectroscopy Supplies: Your Essential Resource for Spectroscopy
Spare Parts and Supplies Kits for Agilent ICP-MS flyer
Agilent ICP-MS Platinum Cone trade-in program flyer
