Agilent - ICP Supplies - Spectroscopy - Lab supplies

Agilent Inductively Coupled Plasma Mass Spectrometry (ICP-MS) is available in single quadrupole and triple quadrupole configurations. Our single quadrupole ICP-MS address the range of typical ICP-MS measurements from routine, regulated analysis to advanced research and demanding applications. Our triple quadrupole ICP-MS will give you the confidence of knowing you can resolve problematic interferences – even in your most difficult samples – delivering results you know you can trust.

Catalog No.		Product	Net Price
	G4912-68003	PFA Inert sample introduction kit with 1.5 mm id platinum injector, for organic samples. Suits Agilent 7700, 7800, 7850, 7900, 8800, 8900 ICP-MS with PFA inert kit. Not compatible with HMI / UHMI aerosol gas dilution. If make up and option gas are both re	10508	Add to Cart
UNSPSC Code 41115411
	G3285-80021	PFA Spray chamber for inert kit, Scott double-pass, for use with all Agilent ICP-MS. Suits PFA inert sample introduction kit used for the analysis of Hyrdofluoric acid (HF) and semiconductor applications. Requires End Cap G3285-80020	1308	Add to Cart
UNSPSC Code 41115411 Chemical Compatibility Aqueous HF acid Organic solvents Strong acids Material PFA Type Scott style
	G8010-68006	Inert sample introduction kit for Agilent 5000 series RV ICP-OES. Includes double-pass spray chamber, inert (p/n G8014-68002), OneNeb 2 nebulizer (p/n G8010-60293), Easy-fit torch, inert, semi-demountable torch with 1.8 mm ceramic injector (p/n G8010-6023	3519	Add to Cart
UNSPSC Code 41113000 Notes Inert double-pass spray chamber with ball joint socket, OneNeb nebulizer, inert demountable Easy-fit torch with ceramic injector (1.8 mm id), torch clamp for inert torch and Solvaflex peristaltic pump tubes for sample (black/black tabs) and waste (gray/gray tabs)
	G8014-20002	Replacement baffle (internal), for inert spray chamber (p/n G8014-68002). Used with 5000 series ICP-OES and MP-AES	127	Add to Cart
UNSPSC Code 411130000
	G8014-68005	O-ring kit for inert spray chamber (p/n G8014-68002). Includes O-rings, 3/pk	23	Add to Cart
UNSPSC Code 411130000 Where Used Spray Chamber
	G8014-68007	Drain connector, 10/32UNF to Luer Slip, for inert spray chamber (p/n G8014-68002). Includes O-ring and Leur slip for inert spray chamber drain fitting.	6	Add to Cart
UNSPSC Code 411130000 Where Used Spray Chamber
	G3285-80034	Injector, sapphire, 2.5 mm id, for PFA inert kit, for aqueous samples. Replacement for PFA inert sample introduction kit with Agilent 7500, 7700, 7800, 7850, 7900, 8800, 8900 ICP-MS	3239	Add to Cart
UNSPSC Code 41115411 Chemical Compatibility Aqueous HF acid Strong acids Type Inert
	G3285-80085	O-ring for PFA Inert injector platinum or sapphire, black, FPM, for Agilent ICP-MS PFA inert kit, 10pcs. 8.8 mm id, 1.9 mm cross section, suitable for use with inert sample introduction for all Agilent ICP-MS	53	Add to Cart
Inner Diameter (ID) 8.8 mm UNSPSC Code 41115411 Material FPM Where Used Torch
	G4912-80010	Injector, sapphire, 1.5 mm id, for PFA inert kit, for organic solvent analysis. Replacement for PFA inert sample introduction kit with Agilent 7700, 7800, 7850, 7900, 8800, 8900 ICP-MS	3529	Add to Cart
UNSPSC Code 41115411 Chemical Compatibility Aqueous HF acid Organic solvents Strong acids Type Inert
	G4912-80011	Injector, platinum, 1.5 mm id, for PFA inert kit, for organic solvent analysis in semiconductor applications. Replacement for PFA inert sample introduction kit with Agilent 7700, 7800, 7850, 7900, 8800, 8900 ICP-MS	8084	Add to Cart
UNSPSC Code 41115411 Chemical Compatibility Aqueous HF acid Organic solvents Strong acids Type Inert

<< 73 74 75 76 777879 80 81 82 83 >>

Overview

ICP-MS system operates with an ICP-MS Nebulizer, in which a high velocity Argon gas stream meets a liquid stream causing filmwise breakup of the solution into a fine aerosol. The aerosol particle size should ideally be sub-10µm with a narrow particle size distribution to achieve efficient atomization and ionization. Agilent offers a comprehensive range of ICP-MS nebulizers and supplies to solve any ICP-MS analysis challenge.

The portfolio includes standard glass concentric nebulizer (MicroMist), quartz and inert PFA nebulizers (MicroFlow and C-Flow), as well as robust Mira Mist PEEK or PTFE for high TDS samples and low-flow self-aspirating or total consumption nebulizers for your clinical or limited volume samples. ICP-MS nebulizer support is provided with a full range of accessories for all models including nebulizer cleaning tools.

The ICP torch is used to form, shape, and sustain an argon plasma which atomizes and ionizes the sample aerosol. Agilent ICP-MS Torches with Shield Torch System (STS) provide precise ion energy control, ensuring high sensitivity and stability, even in cool plasma mode for effective interference removal (ArO+).

Our portfolio is comprised of a wide range of ICP torches for your specific ICP-MS configuration. One-piece quartz torches offer the best stability and ease of use. The large 2.5mm injector on the standard torch gives maximum robustness and lowest matrix interferences for the best plasma stability. Single-piece torches with narrow bore injectors (1.0mm or 1.5 mm) are designed for use with organic solvents, to reduce plasma loading and improve plasma stability. Optional semi-demountable quartz torches with removable platinum or sapphire injectors are also available for use with the PFA inert sample introduction kit.

Resources

Agilent Spectroscopy Supplies: Your Essential Resource for Spectroscopy

Spare Parts and Supplies Kits for Agilent ICP-MS flyer

Agilent ICP-MS Platinum Cone trade-in program flyer

Related Categories