Agilent - ICP Supplies - Spectroscopy - Lab supplies

Agilent Inductively Coupled Plasma Mass Spectrometry (ICP-MS) is available in single quadrupole and triple quadrupole configurations. Our single quadrupole ICP-MS address the range of typical ICP-MS measurements from routine, regulated analysis to advanced research and demanding applications. Our triple quadrupole ICP-MS will give you the confidence of knowing you can resolve problematic interferences – even in your most difficult samples – delivering results you know you can trust.

Catalog No.		Product	Net Price
	CP913777	Sample inlet tubing for inert Mira Mist nebulizer used with ICP-OES/ICP-MS. Fitted with 0.5 m of 0.018 inch id x 0.044 inch od tubing with threaded fitting to connect directly to nebulizer body.	137	Add to Cart
Inner Diameter (ID) 0.46 mm Length 0.5 m UNSPSC Code 41115411 Outer Diameter (OD) 1.11 mm Where Used Nebulizer
	G1820-65138	Nebulizer, concentric, quartz, recommended for organic and high purity analysis. Quartz concentric nebulizer recommended for trace analysis of high purity samples. Cleaner than borosilicate glass nebulizers used as standard. Suitable for most sample type	1351	Add to Cart
UNSPSC Code 41115411 Autosampler Compatibility I-AS Other SPS 3 SPS 4 Chemical Compatibility Aqueous Organic solvents Material Quartz Nebulizer Sample Particle Size Tolerance 40 µm Notes Recommended for trace analysis of clean samples. Lower contamination level than Pyrex. Clean using 5 % HNO3 (v/v) bath; do not use ultrasonic bath. 3 (v/v) bath; do not use ultrasonic bath. --> Self Aspirating Yes, volume not limited Type Concentric
	G1833-65583	Nebulizer gas line connector for Microflow PFA concentric nebulizer. Union connector for nebulizer (a.k.a. carrier) argon gas line	30	Add to Cart
UNSPSC Code 41115411 Material PFA Notes Connector for MicroFlow nebulizer Where Used Nebulizer
	G1960-20033	Microflow nebulizer needle	183	Add to Cart
UNSPSC Code 41116107
	G3161-80001	Nebulizer, Mira Mist, PEEK, for high TDS applications, suitable for all Agilent ICP-MS series. Enhanced parallel path nebulizer gives high salts and TDS capability. Not suitable for HF, high concentrations of acids and some organic solvents. Does not sel	1130	Add to Cart
UNSPSC Code 41115411 Autosampler Compatibility I-AS Other SPS 3 SPS 4 Chemical Compatibility Aqueous Gas Connector Threaded connector Material PEEK Name MiraMist Nebulizer Sample Particle Size Tolerance 150 µm Notes Agilent 7500/7700 and 8800 series ICP-MS Sample Connection Threaded connector Sample Uptake Rate 2500 Self Aspirating No Type Parallel path
	G3266-80004	Nebulizer, MicroMist, U-series with UniFit sample connector, standard with Agilent 7800/7850/7900 Series ICP-MS. Borosilicate glass concentric nebulizer used as standard on Agilent x-lens ICP-MS instruments. Suitable for most sample types except those con	789	Add to Cart
UNSPSC Code 41113000 Autosampler Compatibility I-AS Other SPS 3 SPS 4 Chemical Compatibility Aqueous Organic solvents Gas Connector Ezylok Material Borosilicate glass Name MicroMist Nebulizer Sample Particle Size Tolerance 40 µm Notes Standard on 78/79/8800Suitable for most sample types except those containingHF or suspended particulates. Suitable for most sample types except those containingHF or suspended particulates. --> Sample Connection U-Series Sample Uptake Rate 400 Self Aspirating Yes, volume not limited TDS Handling Capability 15 % TDS Type Concentric
	G3266-80005	Nebulizer, MicroMist, U-series with UniFit sample connector and threaded Direct Connection gas line, standard with Agilent 8900 Series ICP-MS. Borosilicate glass concentric nebulizer used as standard on Agilent x-lens ICP-MS instruments. Suitable for most	736	Add to Cart
UNSPSC Code 41113000 Autosampler Compatibility I-AS Other SPS 3 SPS 4 Chemical Compatibility Aqueous Organic solvents Gas Connector Threaded connector Material Borosilicate glass Name MicroMist Nebulizer Sample Particle Size Tolerance 40 µm Notes Suits Agilent 8900 Series ICP-MS Sample Connection U-Series Sample Uptake Rate 400 Self Aspirating Yes, volume not limited TDS Handling Capability 15 % TDS Type Concentric
	G3266-80011	Sample uptake tube and connector, EzyFit, 0.5 mm id, 700 mm capillary, for MicroMist concentric nebulizer, 10/pk. Standard on 7700 and 8800 ICP-MS, suitable for all Agilent ICP-MS using the EzyFit MicroMist nebulizer	245	Add to Cart
Inner Diameter (ID) 0.5 mm Length 700 mm UNSPSC Code 41115411 Notes For MicroMist nebulizer with EzyFit sample connector, 0.5 mm id, 700 mm Where Used Nebulizer
	G3266-80012	Sample uptake tube and connector, UniFit, 0.5 mm id, with 0.5 mm id x 700 mm capillary, for U-Series MicroMist concentric nebulizer, 10/pk. Standard on 7800, 7850 and 7900 ICP-MS, suitable for all Agilent ICP-MS using the U-series MicroMist nebulizer	236	Add to Cart
Inner Diameter (ID) 0.5 mm Length 700 mm UNSPSC Code 41113000 Notes For U-Series MicroMist nebulizer with Unifitsample connector sample connector --> Where Used Nebulizer
	G3266-80015	EzyLok gas connector for carrier gas, suits most concentric nebulizers used with ICP-OES/MS. Only Ezylok connector supplied, suits 4 mm od gas inlet tubing	33	Add to Cart
UNSPSC Code 41115411 Where Used Nebulizer

<< 67 68 69 70 717273 74 75 76 77 >>

Overview

ICP-MS system operates with an ICP-MS Nebulizer, in which a high velocity Argon gas stream meets a liquid stream causing filmwise breakup of the solution into a fine aerosol. The aerosol particle size should ideally be sub-10µm with a narrow particle size distribution to achieve efficient atomization and ionization. Agilent offers a comprehensive range of ICP-MS nebulizers and supplies to solve any ICP-MS analysis challenge.

The portfolio includes standard glass concentric nebulizer (MicroMist), quartz and inert PFA nebulizers (MicroFlow and C-Flow), as well as robust Mira Mist PEEK or PTFE for high TDS samples and low-flow self-aspirating or total consumption nebulizers for your clinical or limited volume samples. ICP-MS nebulizer support is provided with a full range of accessories for all models including nebulizer cleaning tools.

The ICP torch is used to form, shape, and sustain an argon plasma which atomizes and ionizes the sample aerosol. Agilent ICP-MS Torches with Shield Torch System (STS) provide precise ion energy control, ensuring high sensitivity and stability, even in cool plasma mode for effective interference removal (ArO+).

Our portfolio is comprised of a wide range of ICP torches for your specific ICP-MS configuration. One-piece quartz torches offer the best stability and ease of use. The large 2.5mm injector on the standard torch gives maximum robustness and lowest matrix interferences for the best plasma stability. Single-piece torches with narrow bore injectors (1.0mm or 1.5 mm) are designed for use with organic solvents, to reduce plasma loading and improve plasma stability. Optional semi-demountable quartz torches with removable platinum or sapphire injectors are also available for use with the PFA inert sample introduction kit.

Resources

Agilent Spectroscopy Supplies: Your Essential Resource for Spectroscopy

Spare Parts and Supplies Kits for Agilent ICP-MS flyer

Agilent ICP-MS Platinum Cone trade-in program flyer

Related Categories