+852-3069 6950
css@gugent.com.hk
 

Agilent Inductively Coupled Plasma Mass Spectrometry (ICP-MS) is available in single quadrupole and triple quadrupole configurations. Our single quadrupole ICP-MS address the range of typical ICP-MS measurements from routine, regulated analysis to advanced research and demanding applications. Our triple quadrupole ICP-MS will give you the confidence of knowing you can resolve problematic interferences – even in your most difficult samples – delivering results you know you can trust.

Catalog No. Product Net Price
G8411-67116 ISIS 3 Piston pump seal installation tool. Required to replace the seal on the piston pump 374 
Add to Cart
  • UNSPSC Code
  • 41113000
G8411-68201 Obsolete. Replaced by G8411-68202 Special offer 
Add to Cart
  • UNSPSC Code
  • 41113000
  • Notes
  • Includes a set of sample lines and connectors
G8411-68202 ISIS 3 preconfigured tubing and loop kit, for discrete sampling. Includes all sample and pump tubing assembled with connectors, ready for installation to ISIS 3 valve. Sample loop (5005-0040), 1.5 mL, 2.18 mm id is included, other sizes available to order 1070 
Add to Cart
G8411-80115 ISIS 3 piston pump 2507 
Add to Cart
  • UNSPSC Code
  • 41113000
AGIL5023-1517 ISIS3, Fitting, male to barb, 1/4-28UNF-ID3.2, PEEK, natural. Suitable for ISIS3 used with Agilent 7800, 7850, 7900 and 8900 ICP-MS 22 
Add to Cart
  • UNSPSC Code
  • 40141616
  • Material
  • PEEK
  • Where Used
  • ISIS 3
AGIL5023-1519 ISIS 3, Orange Flangeless fitting, 1/16 inch, for ISTD, 5/pk. With orange PP nut and collapsible PCTFE ferrule. Suitable for use with ISIS3 on 7900 and 8900 ICP-MS. Connects to Tune/ISTD valve from ISTD uptake bottle 24 
Add to Cart
  • Inner Diameter (ID)
  • 1.57 mm
  • UNSPSC Code
  • 40141616
  • Material
  • PP
  • Where Used
  • ISIS 3
AGIL5023-1520 ISIS 3, Purple Flangeless fitting, 1/16 inch, for Tune/ISTD inlet, 5/pk. With purple PP nut and collapsible PCTFE ferrule. Suitable for use with ISIS3 on 7900 and 8900 ICP-MS. Connects to Tune/ISTD valve outlet from ISIS valve inlet 24 
Add to Cart
  • Inner Diameter (ID)
  • 1.57 mm
  • UNSPSC Code
  • 40141616
  • Material
  • PP
  • Where Used
  • ISIS 3
AGIL5023-1521 ISIS 3, Yellow Flangeless fitting, 1/16 inch, for Tune/ISTD valve, 5/pk. With yellow PP nut and collapsible PCTFE ferrule. Suitable for use with ISIS3 on 7900 and 8900 ICP-MS. Connects to ISIS valve inlet from Tune/ISTD valve outlet 24 
Add to Cart
  • Inner Diameter (ID)
  • 1.57 mm
  • UNSPSC Code
  • 40141616
  • Material
  • PP
  • Where Used
  • ISIS 3
AGIL5023-1523 ISIS 3, Black Flangeless fitting, 1/16 inch, for 1.0 mm id sample loop, 5/pk. With black PP nut and collapsible PCTFE ferrule. Suitable for use with ISIS3 on 7900 and 8900 ICP-MS. Connects to ISIS valve from sample loop (1.0 mm id) 24 
Add to Cart
  • Inner Diameter (ID)
  • 1.57 mm
  • UNSPSC Code
  • 40141616
  • Material
  • PP
  • Where Used
  • ISIS 3
AGIL5023-1526 ISIS 3, Red Flangeless fitting, 1/8 inch, for drain, 5/pk. With red PP nut and collapsible PCTFE ferrule. Suitable for use with ISIS3 on 7900 and 8900 ICP-MS. Connects to ISIS valve outlet going to drain via ISIS pump 24 
Add to Cart
  • Inner Diameter (ID)
  • 3.18 mm
  • UNSPSC Code
  • 40141616
  • Material
  • PP
  • Where Used
  • ISIS 3

Overview

ICP-MS system operates with an ICP-MS Nebulizer, in which a high velocity Argon gas stream meets a liquid stream causing filmwise breakup of the solution into a fine aerosol. The aerosol particle size should ideally be sub-10µm with a narrow particle size distribution to achieve efficient atomization and ionization. Agilent offers a comprehensive range of ICP-MS nebulizers and supplies to solve any ICP-MS analysis challenge.

The portfolio includes standard glass concentric nebulizer (MicroMist), quartz and inert PFA nebulizers (MicroFlow and C-Flow), as well as robust Mira Mist PEEK or PTFE for high TDS samples and low-flow self-aspirating or total consumption nebulizers for your clinical or limited volume samples. ICP-MS nebulizer support is provided with a full range of accessories for all models including nebulizer cleaning tools.


The ICP torch is used to form, shape, and sustain an argon plasma which atomizes and ionizes the sample aerosol. Agilent ICP-MS Torches with Shield Torch System (STS) provide precise ion energy control, ensuring high sensitivity and stability, even in cool plasma mode for effective interference removal (ArO+).

Our portfolio is comprised of a wide range of ICP torches for your specific ICP-MS configuration. One-piece quartz torches offer the best stability and ease of use. The large 2.5mm injector on the standard torch gives maximum robustness and lowest matrix interferences for the best plasma stability. Single-piece torches with narrow bore injectors (1.0mm or 1.5 mm) are designed for use with organic solvents, to reduce plasma loading and improve plasma stability. Optional semi-demountable quartz torches with removable platinum or sapphire injectors are also available for use with the PFA inert sample introduction kit.


Resources