+852-3069 6950
css@gugent.com.hk
Agilent Inductively Coupled Plasma Mass Spectrometry (ICP-MS) is available in single quadrupole and triple quadrupole configurations. Our single quadrupole ICP-MS address the range of typical ICP-MS measurements from routine, regulated analysis to advanced research and demanding applications. Our triple quadrupole ICP-MS will give you the confidence of knowing you can resolve problematic interferences – even in your most difficult samples – delivering results you know you can trust.
| Catalog No. | Product | Net Price | |||
|---|---|---|---|---|---|
| G1820-65531 | ISIS-DS Sample uptake tubing, PFA with PEEK guide, 0.3 mm id, 1.6 mm od, 70 cm, 5/pk. Suitable for ISIS-DS used with Agilent 7500 ICP-MS | 598 | |||
|
|||||
| G1833-65569 | Obsolete. Replaced by 5005-0020. Replaced by Easy-fit tubing with 2-stopper optimum length to avoid trimming and expedite sample uptake. | Special offer | |||
|
|||||
| G1833-65570 | Obsolete. Replaced by 5005-0022 | Special offer | |||
|
|||||
| G1833-65571 | Peristaltic pump tubing, for internal standard (ISTD) uptake, PVC Tygon®, 3-stop, orange/red tabs, 0.19 mm id, 1 pack of 12 pcs. Recommended for online ISTD uptake on Agilent 7500 ICP-MS, with 3-stops for maximum lifetime | 106 | |||
|
|||||
| G1833-65572 | Sample tubing, PFA, 0.15 mm id, 1.6 mm od, 70 cm, 3/pk. Small id sample line tubing suitable for use with all Agilent ICP-MS | 118 | |||
|
|||||
| G1833-65573 | Sample tubing, PFA, 0.2 mm id, 1.6 mm od, 70 cm, 3/pk. Small id sample line tubing suitable for use with all Agilent ICP-MS | 118 | |||
|
|||||
| G3280-40103 | Sample tray for ICP-MS | 101 | |||
|
|||||
| G3280-67047 | Obsolete. Replaced by 5005-0021 | Special offer | |||
|
|||||
| G3666-20391 | Blank plug for dilution port, PTFE, for 8900 QQQ ICP-MS. Blocks the Argon inlet if UHMI aerosol dilution is not being used | 20 | |||
|
|||||
| G3666-40104 | Sample tray for 8900 QQQ ICP-MS | 100 | |||
|
|||||
ICP-MS system operates with an ICP-MS Nebulizer, in which a high velocity Argon gas stream meets a liquid stream causing filmwise breakup of the solution into a fine aerosol. The aerosol particle size should ideally be sub-10µm with a narrow particle size distribution to achieve efficient atomization and ionization. Agilent offers a comprehensive range of ICP-MS nebulizers and supplies to solve any ICP-MS analysis challenge.
The portfolio includes standard glass concentric nebulizer (MicroMist), quartz and inert PFA nebulizers (MicroFlow and C-Flow), as well as robust Mira Mist PEEK or PTFE for high TDS samples and low-flow self-aspirating or total consumption nebulizers for your clinical or limited volume samples. ICP-MS nebulizer support is provided with a full range of accessories for all models including nebulizer cleaning tools.
The ICP torch is used to form, shape, and sustain an argon plasma which atomizes and ionizes the sample aerosol. Agilent ICP-MS Torches with Shield Torch System (STS) provide precise ion energy control, ensuring high sensitivity and stability, even in cool plasma mode for effective interference removal (ArO+).
Our portfolio is comprised of a wide range of ICP torches for your specific ICP-MS configuration. One-piece quartz torches offer the best stability and ease of use. The large 2.5mm injector on the standard torch gives maximum robustness and lowest matrix interferences for the best plasma stability. Single-piece torches with narrow bore injectors (1.0mm or 1.5 mm) are designed for use with organic solvents, to reduce plasma loading and improve plasma stability. Optional semi-demountable quartz torches with removable platinum or sapphire injectors are also available for use with the PFA inert sample introduction kit.
Agilent Spectroscopy Supplies: Your Essential Resource for Spectroscopy
Spare Parts and Supplies Kits for Agilent ICP-MS flyer
Agilent ICP-MS Platinum Cone trade-in program flyer
