Merck - Filters and Filtration - Chromatography - Lab supplies

We have developed a unique portfolio of consumables, each adapted to the different feed water quality requirements and to your various applications. To maintain your water system’s performance, it’s critical to replace your purification cartridges on time and with genuine ISO 9001-certified parts.

Catalog No.		Product	Net Price
	KHGEG3THH1	Opticap® Gamma Compatible XLT 30 Millipore Express® SHC 0.5/0.2 µm 5/8 in. HB	1255	Add to Cart
Bacterial Endotoxins Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test Bacterial Retention Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology. Cartridge Nominal Length 30 in. (75 cm) Catalogue Number KHGEG3THH1 Chemistry Polyethersulfone (PES) Device Configuration Capsule Device Material Polypropylene/Polysulfone Device Size 30 in. Diameter 10.7 cm (4.2 in.) Filtration Area 1.63 m² Good Manufacturing Practices These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. Housing Material Polypropylene (PP) Indirect Food Additive All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. Inlet Connection Hose Barb Inlet Connection Diameter 5/8 in. Inlet to Outlet Width 19.8 cm (7.8 in.) Length 30 in. (75 cm) Material Package Double Easy-Open bag Material Size 1 Maximum Differential Pressure 80 psi (5.5 bar) continuous100 psi (6.9 bar) intermittent Maximum Differential Pressure, bar (psid) Forward: 6.9 bar (100 psid) intermittent @ 25 °C; 5.5 bar (80 psid) @ 25 °C; 1.0 bar (15 psid) @ 80 °C. Reverse: 2.1 bar (30 psid) @ 25 °C, intermittent Maximum Inlet Pressure (psig) 80 psig Maximum Inlet Pressure, bar (psi) 6.9 bar (100 psi) intermittent @ 25 °C; 5.5 bar (80 psi) @ 25 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C Maximum Inlet Temperature 25 °C Media Millipore Express® SHC Non-Fiber Releasing This product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). Outlet Connection Hose Barb Outlet Connection Diameter 5/8 in. Oxidizable Substances Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥6 L Pore Size 0.5 / 0.2 µm Seal Material Silicone (SI) Sterility Gamma Sterilization Gamma compatible to 45 kGy; 3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable Support Material Polyester Trade Name Millipore Express® USP Bacterial Endotoxins A sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. Vent Cap Material Polypropylene (PP) Wettability Hydrophilic Width 19.8 cm (7.8 in.)
	KHGEG3THH1	Opticap® Gamma Compatible XLT 30 Millipore Express® SHC 0.5/0.2 µm 5/8 in. HB	1255	Add to Cart
Bacterial Endotoxins Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test Bacterial Retention Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology. Cartridge Nominal Length 30 in. (75 cm) Catalogue Number KHGEG3THH1 Chemistry Polyethersulfone (PES) Device Configuration Capsule Device Material Polypropylene/Polysulfone Device Size 30 in. Diameter 10.7 cm (4.2 in.) Filtration Area 1.63 m² Good Manufacturing Practices These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. Housing Material Polypropylene (PP) Indirect Food Additive All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. Inlet Connection Hose Barb Inlet Connection Diameter 5/8 in. Inlet to Outlet Width 19.8 cm (7.8 in.) Length 30 in. (75 cm) Material Package Double Easy-Open bag Material Size 1 Maximum Differential Pressure 80 psi (5.5 bar) continuous100 psi (6.9 bar) intermittent Maximum Differential Pressure, bar (psid) Forward: 6.9 bar (100 psid) intermittent @ 25 °C; 5.5 bar (80 psid) @ 25 °C; 1.0 bar (15 psid) @ 80 °C. Reverse: 2.1 bar (30 psid) @ 25 °C, intermittent Maximum Inlet Pressure (psig) 80 psig Maximum Inlet Pressure, bar (psi) 6.9 bar (100 psi) intermittent @ 25 °C; 5.5 bar (80 psi) @ 25 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C Maximum Inlet Temperature 25 °C Media Millipore Express® SHC Non-Fiber Releasing This product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). Outlet Connection Hose Barb Outlet Connection Diameter 5/8 in. Oxidizable Substances Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥6 L Pore Size 0.5 / 0.2 µm Seal Material Silicone (SI) Sterility Gamma Sterilization Gamma compatible to 45 kGy; 3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable Support Material Polyester Trade Name Millipore Express® USP Bacterial Endotoxins A sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. Vent Cap Material Polypropylene (PP) Wettability Hydrophilic Width 19.8 cm (7.8 in.)
	KHGEG3TTB1	Opticap® Gamma Compatible XLT 30 Millipore Express® SHC 0.5/0.2 µm 1-1/2 in. TC-1 in. HB	1255	Add to Cart
Bacterial Endotoxins Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test Bacterial Retention Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology. Cartridge Nominal Length 30 in. (75 cm) Catalogue Number KHGEG3TTB1 Chemistry Polyethersulfone (PES) Device Configuration Capsule Device Material Polypropylene/Polysulfone Device Size 30 in. Diameter 10.7 cm (4.2 in.) Filtration Area 1.63 m² Good Manufacturing Practices These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. Housing Material Polypropylene (PP) Indirect Food Additive All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. Inlet Connection Sanitary Flange Inlet Connection Diameter 1-1/2 in. Inlet to Outlet Width 17.5 cm (6.9 in.) Length 30 in. (75 cm) Material Package Double Easy-Open bag Material Size 1 Maximum Differential Pressure 80 psi (5.5 bar) continuous100 psi (6.9 bar) intermittent Maximum Differential Pressure, bar (psid) Forward: 6.9 bar (100 psid) intermittent @ 25 °C; 5.5 bar (80 psid) @ 25 °C; 1.0 bar (15 psid) @ 80 °C. Reverse: 2.1 bar (30 psid) @ 25 °C, intermittent Maximum Inlet Pressure (psig) 80 psig Maximum Inlet Pressure, bar (psi) 6.9 bar (100 psi) intermittent @ 25 °C; 5.5 bar (80 psi) @ 25 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C Maximum Inlet Temperature 25 °C Media Millipore Express® SHC Non-Fiber Releasing This product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). Outlet Connection Hose Barb Outlet Connection Diameter 1 in. Oxidizable Substances Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥6 L Pore Size 0.5 / 0.2 µm Seal Material Silicone (SI) Sterility Gamma Sterilization Gamma compatible to 45 kGy; 3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable Support Material Polyester Trade Name Millipore Express® USP Bacterial Endotoxins A sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. Vent Cap Material Polypropylene (PP) Wettability Hydrophilic Width 17.5 cm (6.9 in.)
	KHGEG3TTB1	Opticap® Gamma Compatible XLT 30 Millipore Express® SHC 0.5/0.2 µm 1-1/2 in. TC-1 in. HB	1255	Add to Cart
Bacterial Endotoxins Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test Bacterial Retention Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology. Cartridge Nominal Length 30 in. (75 cm) Catalogue Number KHGEG3TTB1 Chemistry Polyethersulfone (PES) Device Configuration Capsule Device Material Polypropylene/Polysulfone Device Size 30 in. Diameter 10.7 cm (4.2 in.) Filtration Area 1.63 m² Good Manufacturing Practices These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. Housing Material Polypropylene (PP) Indirect Food Additive All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. Inlet Connection Sanitary Flange Inlet Connection Diameter 1-1/2 in. Inlet to Outlet Width 17.5 cm (6.9 in.) Length 30 in. (75 cm) Material Package Double Easy-Open bag Material Size 1 Maximum Differential Pressure 80 psi (5.5 bar) continuous100 psi (6.9 bar) intermittent Maximum Differential Pressure, bar (psid) Forward: 6.9 bar (100 psid) intermittent @ 25 °C; 5.5 bar (80 psid) @ 25 °C; 1.0 bar (15 psid) @ 80 °C. Reverse: 2.1 bar (30 psid) @ 25 °C, intermittent Maximum Inlet Pressure (psig) 80 psig Maximum Inlet Pressure, bar (psi) 6.9 bar (100 psi) intermittent @ 25 °C; 5.5 bar (80 psi) @ 25 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C Maximum Inlet Temperature 25 °C Media Millipore Express® SHC Non-Fiber Releasing This product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). Outlet Connection Hose Barb Outlet Connection Diameter 1 in. Oxidizable Substances Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥6 L Pore Size 0.5 / 0.2 µm Seal Material Silicone (SI) Sterility Gamma Sterilization Gamma compatible to 45 kGy; 3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable Support Material Polyester Trade Name Millipore Express® USP Bacterial Endotoxins A sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. Vent Cap Material Polypropylene (PP) Wettability Hydrophilic Width 17.5 cm (6.9 in.)
	KHGEG3TTH1	Opticap® Gamma Compatible XLT 30 Millipore Express® SHC 0.5/0.2 µm 1-1/2 in. TC-5/8 in. HB	1255	Add to Cart
Bacterial Endotoxins Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test Bacterial Retention Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology. Cartridge Nominal Length 30 in. (75 cm) Catalogue Number KHGEG3TTH1 Chemistry Polyethersulfone (PES) Device Configuration Capsule Device Material Polypropylene/Polysulfone Device Size 30 in. Diameter 10.7 cm (4.2 in.) Filtration Area 1.63 m² Good Manufacturing Practices These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. Housing Material Polypropylene (PP) Indirect Food Additive All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. Inlet Connection Sanitary Flange Inlet Connection Diameter 1-1/2 in. Inlet to Outlet Width 17.5 cm (6.9 in.) Length 30 in. (75 cm) Material Package Double Easy-Open bag Material Size 1 Maximum Differential Pressure 80 psi (5.5 bar) continuous100 psi (6.9 bar) intermittent Maximum Differential Pressure, bar (psid) Forward: 6.9 bar (100 psid) intermittent @ 25 °C; 5.5 bar (80 psid) @ 25 °C; 1.0 bar (15 psid) @ 80 °C. Reverse: 2.1 bar (30 psid) @ 25 °C, intermittent Maximum Inlet Pressure (psig) 80 psig Maximum Inlet Pressure, bar (psi) 6.9 bar (100 psi) intermittent @ 25 °C; 5.5 bar (80 psi) @ 25 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C Maximum Inlet Temperature 25 °C Media Millipore Express® SHC Non-Fiber Releasing This product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). Outlet Connection Hose Barb Outlet Connection Diameter 5/8 in. Oxidizable Substances Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥6 L Pore Size 0.5 / 0.2 µm Seal Material Silicone (SI) Sterility Gamma Sterilization Gamma compatible to 45 kGy; 3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable Support Material Polyester Trade Name Millipore Express® USP Bacterial Endotoxins A sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. Vent Cap Material Polypropylene (PP) Wettability Hydrophilic Width 17.5 cm (6.9 in.)
	KHGEG3TTH1	Opticap® Gamma Compatible XLT 30 Millipore Express® SHC 0.5/0.2 µm 1-1/2 in. TC-5/8 in. HB	1255	Add to Cart
Bacterial Endotoxins Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test Bacterial Retention Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology. Cartridge Nominal Length 30 in. (75 cm) Catalogue Number KHGEG3TTH1 Chemistry Polyethersulfone (PES) Device Configuration Capsule Device Material Polypropylene/Polysulfone Device Size 30 in. Diameter 10.7 cm (4.2 in.) Filtration Area 1.63 m² Good Manufacturing Practices These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. Housing Material Polypropylene (PP) Indirect Food Additive All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. Inlet Connection Sanitary Flange Inlet Connection Diameter 1-1/2 in. Inlet to Outlet Width 17.5 cm (6.9 in.) Length 30 in. (75 cm) Material Package Double Easy-Open bag Material Size 1 Maximum Differential Pressure 80 psi (5.5 bar) continuous100 psi (6.9 bar) intermittent Maximum Differential Pressure, bar (psid) Forward: 6.9 bar (100 psid) intermittent @ 25 °C; 5.5 bar (80 psid) @ 25 °C; 1.0 bar (15 psid) @ 80 °C. Reverse: 2.1 bar (30 psid) @ 25 °C, intermittent Maximum Inlet Pressure (psig) 80 psig Maximum Inlet Pressure, bar (psi) 6.9 bar (100 psi) intermittent @ 25 °C; 5.5 bar (80 psi) @ 25 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C Maximum Inlet Temperature 25 °C Media Millipore Express® SHC Non-Fiber Releasing This product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). Outlet Connection Hose Barb Outlet Connection Diameter 5/8 in. Oxidizable Substances Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥6 L Pore Size 0.5 / 0.2 µm Seal Material Silicone (SI) Sterility Gamma Sterilization Gamma compatible to 45 kGy; 3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable Support Material Polyester Trade Name Millipore Express® USP Bacterial Endotoxins A sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. Vent Cap Material Polypropylene (PP) Wettability Hydrophilic Width 17.5 cm (6.9 in.)
	KHGEG3TTT1	Opticap® Gamma Compatible XLT 30 Millipore Express® SHC 0.5/0.2 µm 1-1/2 in. TC	1255	Add to Cart
Bacterial Endotoxins Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test Bacterial Retention Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology. Cartridge Nominal Length 30 in. (75 cm) Catalogue Number KHGEG3TTT1 Chemistry Polyethersulfone (PES) Device Configuration Capsule Device Material Polypropylene/Polysulfone Device Size 30 in. Diameter 10.7 cm (4.2 in.) Filtration Area 1.63 m² Good Manufacturing Practices These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. Housing Material Polypropylene (PP) Indirect Food Additive All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. Inlet Connection Sanitary Flange Inlet Connection Diameter 1-1/2 in. Inlet to Outlet Width 15.2 cm (6.0 in.) Length 30 in. (75 cm) Material Package Double Easy-Open bag Material Size 1 Maximum Differential Pressure 80 psi (5.5 bar) continuous100 psi (6.9 bar) intermittent Maximum Differential Pressure, bar (psid) Forward: 6.9 bar (100 psid) intermittent @ 25 °C; 5.5 bar (80 psid) @ 25 °C; 1.0 bar (15 psid) @ 80 °C. Reverse: 2.1 bar (30 psid) @ 25 °C, intermittent Maximum Inlet Pressure (psig) 80 psig Maximum Inlet Pressure, bar (psi) 6.9 bar (100 psi) intermittent @ 25 °C; 5.5 bar (80 psi) @ 25 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C Maximum Inlet Temperature 25 °C Media Millipore Express® SHC Non-Fiber Releasing This product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). Outlet Connection Sanitary Flange Outlet Connection Diameter 1-1/2 in. Oxidizable Substances Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥6 L Pore Size 0.5 / 0.2 µm Seal Material Silicone (SI) Sterility Gamma Sterilization Gamma compatible to 45 kGy; 3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable Support Material Polyester Trade Name Millipore Express® USP Bacterial Endotoxins A sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. Vent Cap Material Polypropylene (PP) Wettability Hydrophilic Width 15.2 cm (6.0 in.)
	KHGEG3TTT1	Opticap® Gamma Compatible XLT 30 Millipore Express® SHC 0.5/0.2 µm 1-1/2 in. TC	1255	Add to Cart
Bacterial Endotoxins Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test Bacterial Retention Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology. Cartridge Nominal Length 30 in. (75 cm) Catalogue Number KHGEG3TTT1 Chemistry Polyethersulfone (PES) Device Configuration Capsule Device Material Polypropylene/Polysulfone Device Size 30 in. Diameter 10.7 cm (4.2 in.) Filtration Area 1.63 m² Good Manufacturing Practices These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. Housing Material Polypropylene (PP) Indirect Food Additive All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. Inlet Connection Sanitary Flange Inlet Connection Diameter 1-1/2 in. Inlet to Outlet Width 15.2 cm (6.0 in.) Length 30 in. (75 cm) Material Package Double Easy-Open bag Material Size 1 Maximum Differential Pressure 80 psi (5.5 bar) continuous100 psi (6.9 bar) intermittent Maximum Differential Pressure, bar (psid) Forward: 6.9 bar (100 psid) intermittent @ 25 °C; 5.5 bar (80 psid) @ 25 °C; 1.0 bar (15 psid) @ 80 °C. Reverse: 2.1 bar (30 psid) @ 25 °C, intermittent Maximum Inlet Pressure (psig) 80 psig Maximum Inlet Pressure, bar (psi) 6.9 bar (100 psi) intermittent @ 25 °C; 5.5 bar (80 psi) @ 25 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C Maximum Inlet Temperature 25 °C Media Millipore Express® SHC Non-Fiber Releasing This product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). Outlet Connection Sanitary Flange Outlet Connection Diameter 1-1/2 in. Oxidizable Substances Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥6 L Pore Size 0.5 / 0.2 µm Seal Material Silicone (SI) Sterility Gamma Sterilization Gamma compatible to 45 kGy; 3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable Support Material Polyester Trade Name Millipore Express® USP Bacterial Endotoxins A sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. Vent Cap Material Polypropylene (PP) Wettability Hydrophilic Width 15.2 cm (6.0 in.)
	KHGES3FTT1	Sterile Opticap® XLT 30 Millipore Express® SHC 0.5/0.2 µm TC/TC 1pk w/3/4" TC top	1255	Add to Cart
Bacterial Endotoxins Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test Bacterial Retention Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology. Cartridge Nominal Length 30 in. (75 cm) Catalogue Number KHGES3FTT1 Chemistry Polyethersulfone (PES) Device Configuration Capsule Device Material Polypropylene/Polysulfone Device Size 30 in. Diameter 19.8 cm (7.8 in.) Filtration Area 1.63 m² Good Manufacturing Practices These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. Housing Material Polypropylene (PP) Indirect Food Additive All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. Inlet Connection Sanitary Flange Inlet Connection Diameter 1-1/2 in. Length 30 in. (75 cm) Material Package Double Easy-Open bag Material Size 1 Maximum Differential Pressure Forward: 5500 mbar (80 psi) @ 25 °C; 1000 bar (15 psi) @ 80 °C; 6900 mbar (100 psi) @ 25 °C, intermittent. Reverse: 2100 bar (30 psi) @ 25 °C, intermittent Maximum Inlet Pressure (psig) 80 psig Maximum Inlet Pressure, bar (psi) 6.9 bar (100 psi) intermittent @ 25 °C; 5.5 bar (80 psi) @ 25 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C Maximum Inlet Temperature 25 °C Media Millipore Express® SHC Non-Fiber Releasing This product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). Outlet Connection Sanitary Flange Outlet Connection Diameter 1-1/2 in. Oxidizable Substances Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥6 L Pore Size 0.5 / 0.2 µm Seal Material Silicone (SI) Sterility Sterile Sterilization 3 autoclave cycles of 60 min @ 126 °C; capable of 45 kilogray (4.5 Megarad) gamma exposure; not in-line steam sterilizable Support Material Polyester Trade Name Millipore Express® USP Bacterial Endotoxins A sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. Vent Cap Material Polypropylene (PP) Wettability Hydrophilic
	KHGES3TBB1	Opticap® Sterile XLT 30 Millipore Express® SHC 0.5/0.2 µm 1 in. HB/HB	1255	Add to Cart
Bacterial Endotoxins Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test Bacterial Retention Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology. Cartridge Nominal Length 30 in. (75 cm) Catalogue Number KHGES3TBB1 Chemistry Polyethersulfone (PES) Device Configuration Capsule Device Material Polypropylene/Polysulfone Device Size 30 in. Diameter 10.7 cm (4.2 in.) Filtration Area 1.63 m² Good Manufacturing Practices These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. Housing Material Polypropylene (PP) Indirect Food Additive All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. Inlet Connection Hose Barb Inlet Connection Diameter 1 in. Inlet to Outlet Width 19.8 cm (7.8 in.) Length 30 in. (75 cm) Material Package Double Easy-Open bag Material Size 1 Maximum Differential Pressure 80 psi (5.5 bar) continuous100 psi (6.9 bar) intermittent Maximum Differential Pressure, bar (psid) Forward: 6.9 bar (100 psid) intermittent @ 25 °C; 5.5 bar (80 psid) @ 25 °C; 1.0 bar (15 psid) @ 80 °C. Reverse: 2.1 bar (30 psid) @ 25 °C, intermittent Maximum Inlet Pressure (psig) 80 psig Maximum Inlet Pressure, bar (psi) 6.9 bar (100 psi) intermittent @ 25 °C; 5.5 bar (80 psi) @ 25 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C Maximum Inlet Temperature 25 °C Media Millipore Express® SHC Non-Fiber Releasing This product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). Outlet Connection Hose Barb Outlet Connection Diameter 1 in. Oxidizable Substances Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥6 L Pore Size 0.5 / 0.2 µm Seal Material Silicone (SI) Sterility Sterile Sterilization 3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable Support Material Polyester Trade Name Millipore Express® USP Bacterial Endotoxins A sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. Vent Cap Material Polypropylene (PP) Wettability Hydrophilic Width 19.8 cm (7.8 in.)

<< 75 76 77 78 798081 82 83 84 85 >>

Overview

Analytical Sample Preparation Membrane Filtration Devices

Trust Merck membrane filtration devices for the collection and preparation of samples, mobile phases, and buffers to obtain the highest quality results from downstream analysis.

Whether you need to collect, separate, or remove contaminants from air or fluid samples prior to downstream analysis, our broad selection of syringe filters, membranes, filter holders and related filtration devices ensures that we have the right solution for your application.

Filter Membranes

Millex® Syringe Filters

Filtration Holders & Accessories

Resources

Samplicity® G2 Filtration System with Millex Samplicity® and Millex® Filters

Related Categories