+852-3069 6950
css@gugent.com.hk
 

Agilent Inductively Coupled Plasma Mass Spectrometry (ICP-MS) is available in single quadrupole and triple quadrupole configurations. Our single quadrupole ICP-MS address the range of typical ICP-MS measurements from routine, regulated analysis to advanced research and demanding applications. Our triple quadrupole ICP-MS will give you the confidence of knowing you can resolve problematic interferences – even in your most difficult samples – delivering results you know you can trust.

Catalog No. Product Net Price
ICM-442 CLP ICP interference check 158 
Add to Cart
  • Format
  • Multi component mixture
  • Analysis Type
  • Quantitative
  • Analyte Count
  • 11
  • Chemical Type
  • Inorganic
  • Packaging
  • Bottle
  • Quality Standard
  • ISO 17034
  • Solvent
  • Water with dilute nitric acid
  • Technique
  • ICP-MS ICP-OES
  • Volume
  • 50 mL
ICM-443 CLP ICP interference check 173 
Add to Cart
  • Format
  • Multi component mixture
  • Analysis Type
  • Quantitative
  • Analyte Count
  • 14
  • Chemical Type
  • Inorganic
  • Packaging
  • Bottle
  • Quality Standard
  • ISO 17034
  • Solvent
  • Water with dilute nitric and trace hydrofluoric and tartaric acids
  • Technique
  • ICP-MS ICP-OES
  • Volume
  • 125 mL
ICM-443 CLP ICP interference check 173 
Add to Cart
  • Format
  • Multi component mixture
  • Analysis Type
  • Quantitative
  • Analyte Count
  • 14
  • Chemical Type
  • Inorganic
  • Packaging
  • Bottle
  • Quality Standard
  • ISO 17034
  • Solvent
  • Water with dilute nitric and trace hydrofluoric and tartaric acids
  • Technique
  • ICP-MS ICP-OES
  • Volume
  • 125 mL
ICM-451 CLP ICP spike standard 165 
Add to Cart
  • Format
  • Multi component mixture
  • Analysis Type
  • Quantitative
  • Analyte Count
  • 12
  • Chemical Type
  • Inorganic
  • Packaging
  • Bottle
  • Quality Standard
  • ISO 17034
  • Solvent
  • Water with dilute nitric and trace hydrofluoric acids
  • Technique
  • ICP-MS ICP-OES
  • Volume
  • 125 mL
ICM-453 CLP ICP spike standard 146 
Add to Cart
  • Format
  • Multi component mixture
  • Analysis Type
  • Quantitative
  • Analyte Count
  • 5
  • Chemical Type
  • Inorganic
  • Packaging
  • Bottle
  • Quality Standard
  • ISO 17034
  • Solvent
  • Water with dilute nitric acid
  • Technique
  • ICP-MS ICP-OES
  • Volume
  • 125 mL
AGIL3710069100 SPS 3/4 Peristaltic pump tubing, FPM, black/black tabs, flared ends, 0.76 mm id. For use with SPS 3/4 autosampler when pumping aromatic organic samples, 12/pk For use with aromatic organic solvents on AA, MP-AES and ICP-OES instruments 270 
Add to Cart
  • Inner Diameter (ID)
  • 0.76 mm
  • Length
  • 400 mm
  • UNSPSC Code
  • 41113000
  • Chemical Compatibility
  • Aromatic organics
  • Flared
  • Yes
  • Number of Stops
  • 3
  • Stop Color
  • Black/Black
  • Tubing Material
  • FPM fluoroelastomer polymer
AGIL3710069200 SPS 3/4 Peristaltic pump tubing, PVC Solvaflex, black/black tabs, flared ends, 0.76 mm id. For use with SPS 3/4 autosampler when pumping low volatile organic samples, 12/pk For use with low volatile organic solvents on AA, MP-AES and ICP-OES instruments 121 
Add to Cart
  • Inner Diameter (ID)
  • 0.76 mm
  • Length
  • 450 mm
  • UNSPSC Code
  • 41113000
  • Chemical Compatibility
  • Aqueous HF acid Low volatile organics
  • Flared
  • Yes
  • Number of Stops
  • 3
  • Stop Color
  • Black/Black
  • Tubing Material
  • Solvaflex
AGIL3710069300 Peristaltic pump tubing, PVC Solvaflex, yellow/yellow tabs, 1.42 mm id, for use with SPS 3/4 autosampler when pumping low volatile organic samples, 12/pk. For use with low volatile organic solvents on AA, MP-AES and ICP-OES instruments 80 
Add to Cart
  • Inner Diameter (ID)
  • 1.42 mm
  • Length
  • 450 mm
  • UNSPSC Code
  • 41113000
  • Chemical Compatibility
  • Aqueous HF acid Low volatile organics
  • Flared
  • No
  • Number of Stops
  • 3
  • Stop Color
  • Yellow/Yellow
  • Tubing Material
  • Solvaflex
AGIL5043-0065 PVC flexible ducting 50 mm id, 5 m length for use with Agilent SPS 4 autosampler. Fitted with 56 mm od EPDM cuffs on each end of the tubing 147 
Add to Cart
  • UNSPSC Code
  • 41113000
  • Autosampler Compatibility
  • SPS 4
G8410-20012 Tubing, solvent resistant, 0.093 inch id, 2 m. Tubing, solvent resistant, 0.093 inch id, 2 m, replacement tubing for waste solvent outlet of rinse station with low volatile organic solvents in rinse station of Agilent SPS 4 autosampler 70 
Add to Cart
  • Inner Diameter (ID)
  • 0.093 in
  • Length
  • 2 m
  • UNSPSC Code
  • 41113000
  • Chemical Compatibility
  • Aqueous Organic solvents
  • Tubing Material
  • Solvaflex
  • Tubing OD
  • 0.187 in
  • Where Used
  • Waste

Overview

ICP-MS system operates with an ICP-MS Nebulizer, in which a high velocity Argon gas stream meets a liquid stream causing filmwise breakup of the solution into a fine aerosol. The aerosol particle size should ideally be sub-10µm with a narrow particle size distribution to achieve efficient atomization and ionization. Agilent offers a comprehensive range of ICP-MS nebulizers and supplies to solve any ICP-MS analysis challenge.

The portfolio includes standard glass concentric nebulizer (MicroMist), quartz and inert PFA nebulizers (MicroFlow and C-Flow), as well as robust Mira Mist PEEK or PTFE for high TDS samples and low-flow self-aspirating or total consumption nebulizers for your clinical or limited volume samples. ICP-MS nebulizer support is provided with a full range of accessories for all models including nebulizer cleaning tools.


The ICP torch is used to form, shape, and sustain an argon plasma which atomizes and ionizes the sample aerosol. Agilent ICP-MS Torches with Shield Torch System (STS) provide precise ion energy control, ensuring high sensitivity and stability, even in cool plasma mode for effective interference removal (ArO+).

Our portfolio is comprised of a wide range of ICP torches for your specific ICP-MS configuration. One-piece quartz torches offer the best stability and ease of use. The large 2.5mm injector on the standard torch gives maximum robustness and lowest matrix interferences for the best plasma stability. Single-piece torches with narrow bore injectors (1.0mm or 1.5 mm) are designed for use with organic solvents, to reduce plasma loading and improve plasma stability. Optional semi-demountable quartz torches with removable platinum or sapphire injectors are also available for use with the PFA inert sample introduction kit.


Resources