Agilent Technologies     G8410-20012

Tubing, solvent resistant, 0.093 inch id, 2 m. Tubing, solvent resistant, 0.093 inch id, 2 m, replacement tubing for waste solvent outlet of rinse station with low volatile organic solvents in rinse station of Agilent SPS 4 autosampler

70 /Each

Pall Corporation     HC2233FCN13H

Red1000 Glass Fiber 7 micron (Beta 1000) Nitrile 13in 33.02cm (REPLACED BY HC2233FRN13Z)

152 /Each

SHIMADZU CORPORATION     228-11999-00

Plunger Seal, LC-6AD

59 /Each

Thermo Fisher Scientific Inc.     THM-60180-P216

SureSTART™ WebSeal™ 96-Well Microtiter Plates, Round U, V, and Flat-Bottom, Level 2 High-Throughput Applications

44.4 /Each

Pall Corporation     C001A10S

DFT Classic®, Filter Cartridges, Removal Rating 1 μm, Length 10 Inches, 316 stainless steel, Bulk packaging

21 /Each

Agilent Technologies     AGIL123-1062

J&W DB-1 GC Column, 60 m, 0.32 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all non-Agilent GC systems with a similarly sized oven.

1093 /Each

Agilent Technologies     AGIL17-4045

Full Flow Filter, PVDF, 10 µm, Green, 1000/Pack

1635 /Each

Thermo Fisher Scientific Inc.     THM-COMC004347

DI-10C Calibration Check Irradiator

Special offer /Each

Agilent Technologies     AGIL8003-0507

Nebulizer, PFA-ST, microflow, inert high TDS, suitable for PerkinElmer ICP-MS. High performance, clog resistant, chemically inert, for ELAN 9000/6xX00/DRC/NexION

1931 /Each

Pall Corporation     NXT5010UDOEE

Nexis® T Filter Cartridges, Removal Rating 50 μm, Polypropylene, Length 10 inches, EPDM, DOE with elastomer gasket seals and end caps

30 /Each

Pall Corporation     HC2235FCS15

Red1000 Glass Fiber 12 micron (Beta 1000) Nitrile 15in 38.1cm (REPLACED BY HC2235FRS15)

152 /Each

MilliporeSigma     SYNC376025

Synthware™ chromatography column with reservoir and PTFE stopcock, 500 mL, top joint: ST/NS 24/40, I.D. × L 53.0 mm × 254 mm

156.8 /Each