-
Flow rate
0.001-10 ml/min
-
Material
Polyetheretherketone (PEEK)\nPolytetrafluoroethylene (PTFE)\nEthylenechlorotrifluoro-ethylene (ECTFE)\nPolyvinylidenefluoride (PVDF)\nPolyethylene (PE)\nTitanium alloy (Ti alloy)\nAluminium oxide (Al oxide)\nElgiloy\nRuby\nZirconia
-
Compliance
The product fulfills valid directives and standards when used within the conditions specified in the user manual. The product must also be used in the same state as it was delivered from Cytiva and connected only to other CE labeled Cytiva modules or other products as recommended. For regulatory details please see declaration of conformity.
-
Connections
UNF 10-32 2B ”Fingertights”
-
Operating pressure max.
250 bar (25 MPa) (3625 psi)
-
Operating Temperature
4°C-40°C
-
Weight
17
-
Chemical stability
The wetted parts are resistant to organic solvents and salt buffers commonly used in chromatography of biomolecules, except 100% Ethylacetate, 100% Hexane, and 100 % Tetrahydrofuran (THF).
-
Height
150 mm
-
Wetted Materials
Polyetheretherketone (PEEK)\nPolytetrafluoroethylene (PTFE)\nEthylenechlorotrifluoro-ethylene (ECTFE)\nPolyvinylidenefluoride(PVDF)\nPolyethylene (PE)\nTitanium alloy (Ti alloy)\nAluminium oxide (Al oxide)\nElgiloy\nRuby\nZirconia
-
Wetted Part
Yes
-
Includes
Pump with 4 pump heads, inlet filter assembly, inlet tubing kit [1/82], tubing kit for rinsing system, mixer M-925, mixer chamber [2.0 ml with pump P-901 and 0.6 ml with pump P-903], mixer bracket, PEEK tubing [2 m, 0.5 mm i.d., 1/162 o.d.), fingertight connector [1/162], injection syringe 30 ml, stop plug [1/162] and a signal cable
-
Power consumption
Max. 400 VA with all extra components connected
-
Relative humidity
20%-95% (non condensing)
-
Width
260
-
Depth
370 mm
-
Voltage
100-120/220-240 VAC
-
Protection class
IP 20 (Housing)
-
pH Stability Long Term
1-13
-
pH Stability Short Term
1–14
-
Viscosity Max.
5
+852-3069 6950
css@gugent.com.hk
