KHGLS10FF1 - Merck - Filters and Filtration - Chromatography - Lab supplies

: Catalog No. KHGLS10FF1

Part No. KHGLS10FF1
Supplier Merck KGaA

Opticap® Sterile Multilayer XL10 Durapore® 0.45/0.22 µm 3/4 in. TC/TC

Net Price

472

Availability

4 weeks

PROPERTIES

Bacterial Endotoxins

Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Bacterial Retention

Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
Cartridge Nominal Length

10 in. (25 cm)
Catalogue Number

KHGLS10FF1
Chemistry

Polyvinylidene Fluoride (PVDF)
Device Configuration

Capsule
Device Material

Polypropylene
Device Size

10 in.
Diameter

10.7 cm (4.2 in.)
European Pressure Equipment Directive

EMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
Filtration Area

0.55 m²
Good Manufacturing Practices

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Housing Material

Polypropylene (PP)
Indirect Food Additive

All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Inlet Connection

Sanitary Flange
Inlet Connection Diameter

3/4 in.
Inlet to Outlet Width

33.5 cm (13.2 in.)
Length

10 in. (25 cm)
Material Package

Double Easy-Open bag
Material Size

1
Maximum Differential Pressure, bar (psid)

Forward: 5.5 bar (80 psid) @ 25 °C; 1.05 bar (15 psid) @ 80 °C. Reverse: 3.5 bar (50 psid) @ 25 °C, intermittent
Maximum Inlet Pressure (psig)

80 psig
Maximum Inlet Pressure, bar (psi)

5.5 bar (80 psi) @ 23 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
Maximum Inlet Temperature

25 °C
Media

Multilayer Durapore®
Non-Fiber Releasing

This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Outlet Connection

Sanitary Flange
Outlet Connection Diameter

3/4 in.
Oxidizable Substances

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥1.5 L
Pore Size

0.45 / 0.22 µm
Seal Material

Lead O-ring: Silicone-coated EPDM, Outer O-ring: Silicone
Sterility

Sterile
Sterilization

3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable
Support Material

Polyester/Polyethylene
Trade Name

Opticap®
USP Bacterial Endotoxins

A sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Vent Cap Material

Polypropylene (PP)
Wettability

Hydrophilic
Width

33.5 cm (13.2 in.)

DESCRIPTION

Genuine product