KN1HA05TT1 - Merck - Filters and Filtration - Chromatography - Lab supplies

: Catalog No. KN1HA05TT1

Part No. KN1HA05TT1
Supplier Merck KGaA

Opticap® XL5 Polygard®-CN 10.0 µm 1-1/2 in. TC/TC

Net Price

133

Availability

4 weeks

PROPERTIES

Bacterial Endotoxins

Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Cartridge Nominal Length

5 in. (12.5 cm)
Catalogue Number

KN1HA05TT1
Chemistry

Polypropylene (PP)
Device Configuration

Capsule
Device Material

Polypropylene
Device Size

5 in.
Diameter

10.7 cm (4.2 in.)
European Pressure Equipment Directive

EMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
Filtration Area

0.18 m²
Format

Single Layer
Good Manufacturing Practices

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Gravimetric Extractables

The extractables level was equal to or less than 25 mg per capsule after 24 hours in water at controlled room temperature.
Housing Material

Polypropylene (PP)
Indirect Food Additive

All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Inlet Connection

Sanitary Flange
Inlet Connection Diameter

1-1/2 in.
Inlet to Outlet Width

21.6 cm (8.5 in.)
Length

5 in. (12.5 cm)
Material Package

Double Easy-Open bag
Material Size

1
Maximum Differential Pressure, bar (psid)

4.8 bar (70 psid) @ 20 °C
Maximum Inlet Pressure (psig)

80 psig
Maximum Inlet Pressure, bar (psi)

5.5 bar (80 psi) @ 25 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
Maximum Inlet Temperature

25 °C
Media

Polygard®-CN
Nominal Pore Size

10.0 µm
Outlet Connection

Sanitary Flange
Outlet Connection Diameter

1-1/2 in.
Oxidizable Substances

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥2 L
Pore Size

10.0 µm
Seal Material

Silicone (SI)
Sterilization

3 autoclave cycles of 30 min @ 126 °C; not in-line steam sterilizable
Support Material

Polypropylene
Trade Name

Opticap®
USP Bacterial Endotoxins

A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Vent Cap Material

Polypropylene (PP)
Width

21.6 cm (8.5 in.)

DESCRIPTION

Genuine product