+852-3069 6950
css@gugent.com.hk
Home Products
Catalog No. SN12A47FF3
Part No. SN12A47FF3
Supplier Merck KGaA
Optiscale® Capsule Polygard®-CN 1.2 µm 3/4 in. TC/TC
Net Price
89
Availability

4 weeks

PROPERTIES
  • Bacterial Endotoxins
    Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
  • Catalogue Number
    SN12A47FF3
  • Chemistry
    Polypropylene (PP)
  • Device Configuration
    Capsule
  • Device Material
    Polycarbonate
  • Diameter
    6.9 cm (2.7 in.)
  • Filtration Area
    17.7 cm²
  • Format
    Single Layer
  • Good Manufacturing Practices
    These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
  • Indirect Food Additive
    All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
  • Inlet Connection
    Sanitary Flange
  • Inlet Connection Diameter
    3/4 in.
  • Material Size
    3
  • Maximum Inlet Pressure (psig)
    80 psig
  • Maximum Inlet Pressure, bar (psi)
    5.5 bar (80 psi) @ 25 °C
  • Maximum Inlet Temperature
    25 °C
  • Media
    Polygard®-CN
  • Nominal Pore Size
    1.2 µm
  • Outlet Connection
    Sanitary Flange
  • Outlet Connection Diameter
    3/4 in.
  • Oxidizable Substances
    Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL
  • Pore Size
    1.2 µm
  • Seal Material
    Fluoroelastomer (FKM)
  • Sterilization
    3 autoclave cycles of 60 min @ 126 °C; not in-line steam sterilizable
  • Support Material
    Polypropylene
  • Trade Name
    OptiScale®
  • Vent Cap Material
    Polyvinylidene fluoride (PVDF)
DESCRIPTION
Genuine product
CUSTOMERS ALSO VIEWED

Merck KGaA     SN12A47FF3

Optiscale® Capsule Polygard®-CN 1.2 µm 3/4 in. TC/TC

89 /Each

SHIMADZU CORPORATION     220-92910-34

Cell, Clyinder W/ Stopper 20 mm, Glass.

127 /Each

Sartorius AG     17825----------Q

Minisart® NML Plus Glass Fiber 1.2 µm Cellulose Acetate Non Sterile Syringe Filter

904 /Each

Merck KGaA     CR01F1006

Polygard-CR Cartridge Filter 10 in. 1.0 µm Code F

225 /Each

GL Sciences Inc.     GLS5020-07221

Inertsil AX HPLC Column, 5 µm, 33 x 3.0 mm (analytical)

385 /Each

Thermo Fisher Scientific Inc.     THM842312052411

Peristaltic Pump Tubing for iCAP™ Series ICP-OES Systems

35.99 /Each

MilliporeSigma     SIG58997

SUPELCOSIL™ LC-SCX HPLC Column, 5 μm particle size, L × I.D. 25 cm × 4.6 mm

729.6 /Each

SHIMADZU CORPORATION     REST-9314A32

Raptor ARC-18 2.7um 30 x 2.1mm

622 /Each

Agilent Technologies     AGIL123-1032-INT

J&W DB-1 Intuvo GC column module, 30 m, 0.32 mm, 0.25 µm. (compatible only with the Intuvo 9000 GC System)

777 /Each

Metrohm AG     METR6.2743.077

Stopper with perforation

Special offer /Each

Regis Technologies, Inc.     REG1-594217-300

REFLECT I-Cellulose J, Guard Column - 5 µm, 1 cm x 3.0 mm ID (Qty of 3)

338 /Each

Agilent Technologies     PL1951-1502

PL-SAX 1000Å, 2.1 x 50 mm, 5 µm. A strong anion exchange HPLC column with fully porous PS/DVB particles. This column can withstand a wide pH range (1-14) and is stable at elevated temperatures

762 /Each
RELATED CATEGORIES
Contact
Flat 06C, 17/F, Wah Fat Industrial Building, 10-14 Kung Yip Street, Kwai Chung, N.T., Hong Kong
+852-3069 6950
+852-2481 3702
css@gugent.com.hk
www.gugent.com.hk
  • Lab supplies
  • Instruments
  • Resources
  • About us
  • Contact
  • Terms and Conditions
  • Privacy Policy
    • Copyright © Gugent Technology Co., Limited