+852-3069 6950
sales@gugent.com.hk
Catalog No. KPHLS1THH1
Part No. KPHLS1THH1
Supplier Merck KGaA
Opticap® Sterile XLT10 Durapore® 0.45 µm 5/8" HB/HB without gauge port
Net Price
298
Availability

4 weeks

PROPERTIES
  • Bacterial Endotoxins
    Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
  • Cartridge Nominal Length
    14.8 in. (37.6 cm)
  • Catalogue Number
    KPHLS1THH1
  • Chemistry
    Polyvinylidene Fluoride (PVDF)
  • Device Configuration
    Capsule
  • Device Material
    Polypropylene
  • Device Size
    10 in.
  • Diameter
    10.7 cm (4.2 in.)
  • Filtration Area
    0.62 m²
  • Good Manufacturing Practices
    These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
  • Gravimetric Extractables
    The extractables level was equal to or less than 25 mg per capsule after 24 hours in water at controlled room temperature.
  • Housing Material
    Polypropylene (PP)
  • Indirect Food Additive
    All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
  • Inlet Connection
    Hose Barb
  • Inlet Connection Diameter
    5/8 in.
  • Inlet to Outlet Width
    37.6 cm (14.8 in.)
  • Length
    14.8 in. (37.6 cm)
  • Material Size
    1
  • Maximum Differential Pressure, bar (psid)
    Forward: 4.1 bar (60 psid) @25 ˚C. Reverse: 2.1 bar (30 psid) @ 4-40 °C
  • Maximum Inlet Pressure (psig)
    80 psig
  • Maximum Inlet Pressure, bar (psi)
    5.5 bar (80 psi) @ 23 °C; 2.8 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
  • Maximum Inlet Temperature
    25 °C
  • Media
    Durapore®
  • Outlet Connection
    Hose Barb
  • Outlet Connection Diameter
    5/8 in.
  • Oxidizable Substances
    Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥1500 mL
  • Pore Size
    0.45 µm
  • Seal Material
    Lead O-ring: Silicone-coated EPDM, Outer O-ring: Silicone
  • Sterility
    Sterile
  • Sterilization
    Minimum sterilization up to 25 kGy. 3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable
  • Support Material
    Polyester/Polyethylene
  • Trade Name
    Opticap®
  • USP Bacterial Endotoxins
    A sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
  • Vent Cap Material
    Polypropylene (PP)
  • Wettability
    Hydrophilic
  • Width
    37.6 cm (14.8 in.)
DESCRIPTION
Prefiltration / Bioburden reduction in single use assemblies Bioburden reduction before final sterilization Process protection of intermediate consumables esp. in Plasma / Vaccine / r-Protein
CUSTOMERS ALSO VIEWED