CYT56410599
Pressure Gauge 0-2 barg (0-30 psig) 25 mm
1621.5
Material
Brass\nStainless Steel\nPlastic
Autoclavable
No
Connections
Threaded on a 25 mm TC (0.75 inch TC) connector
Operating pressure max.
2 bar (30 psi)
Wetted Part
Yes
Application
No
Guidance
Pressure gauge 0-4 barg (0-60 psig) with the same threaded connections is also available
CYT56410600
Pressure Gauge 0-2 barg (0-30 psig) 25 mm
1621.5
Material
Brass\nStainless Steel\nPlastic
Autoclavable
No
Connections
Threaded on a 25 mm TC (0.75 inch TC) connector
Operating pressure max.
2 bar (30 psi)
Wetted Part
Yes
Application
No
Guidance
Pressure gauge 0-4 barg (0-60 psig) with the same threaded connections is also available
CYT28956295
Flexible column holder
1635
For use with
ÄKTA avant and ÄKTA pure systems, and HiScreen or HiPrep columns of new design
Wetted Materials
Polyetheretherketone (PEEK)
Wetted Part
Yes
Guidance
Fitting 1/16\
Includes
Installation instructions, PEEK tubing
Tubing i.d.
0.5 mm
CYT19758501
Superloop, M6 fitting, 10 ml
2064
Flow rate
< 100 ml/min, 10 ml/min when emptying completely
Dimensions
130 x 30 mm
Material
Borosilicate glass\nPolyetheretherketone (PEEK)\nPerfluor rubber (PFR)\nNitrilebutadiene rubber (NBR)
Connections
1/16\
Operating pressure max.
40 bar (4 MPa) (580 psi)
Operating Temperature
4°C-40°C
Chemical stability
For use with aqueous solutions and alcohols. Accessory O-rings, solvent resistant, permit use with organic solvents such as acetonitrile and organic esters
Wetted Materials
Borosilicate glass\nPolyetheretherketone (PEEK)\nPerfluor rubber (PFR)\nNitrilebutadiene rubber (NBR)
Wetted Part
Yes
Guidance
.
Includes
1 x Tubing i.d. 0.75 mm o.d. 1/16\
pH Stability Short Term
1(<1 day exposure)–14(<1 day exposure)
CYT18112124
Flow Cell Air-925, i.d. 2.5 mm
2125.5
CYT18112123
Flow Cell Air-912, i.d. 1.2 mm
2130
CYT28980309
Mixer chamber 15 ml
2173.5
For use with
Mixer M-925
Material
Polyetheretherketone (PEEK)
Connections
Fingertight connector
Operating pressure max.
250 bar (25 MPa) at 0.001 to 10 ml/min (3625 psi at 0.001 to 10 ml/min)
Chemical stability
The wetted parts are resistant to organic solvents and salt buffers commonly used in chromatography of biomolecules, except 100% Ethylacetate, 100% Hexane, and 100% Tetrahydrofuran (THF).
Wetted Materials
Polyetheretherketone (PEEK)
Wetted Part
Yes
Relative humidity
10%-95% (non condensing)
pH Stability Long Term
1-13
pH Stability Short Term
1–14
CYT18110536
Pressure Relief Valve for FineLINE 70,100, and 200 Columns
2199
For use with
FineLine 70,100, and 200 columns
Material
Fluor carbon rubber (FPM)\nStainless steel (316)
Connections
25 mm TC
Wetted Part
Yes
Guidance
Recommended for pressure packing. \n\nOptional for packing the column.\n\nTo install the relief valve 3x gaskets, 25 mm and 3x clamps 25 mm are needed and have to be ordered separately.
i.d.
6 mm (0.23 in)
CYT18114720
Conductivity Flow Cell, 0.2
2260.5
Flow rate
< 2 ml/min
Material
Chlorotrifluoroethylene (CTFE)
Operating pressure max.
50 bar (5 MPa) (725 psi)
Chemical stability
The wetted parts are resistant to organic solvents and salt buffers commonly used in chromatography of biomolecules, except \n100 % Ethyl acetate, \n100 % Hexane and \n100 % Tetrahydrofuran.
Wetted Materials
Chlorotrifluoroethylene (CTFE)
Wetted Part
Yes
pH Stability Long Term
1-13
pH Stability Short Term
1–14
CYT56410593
Diaphragm Valve, 50 mm TC, SS
2439
Material
Ethylene propylene diene (EPDM)\nStainless steel
Connections
25 mm TC
Wetted Part
Yes
Guidance
Gaskets and clamps to connect the valve have to be ordered separately.
i.d.
19 mm (0.75 in)
+852-3069 6950
sales@gugent.com.hk
