+852-3069 6950
css@gugent.com.hk
 

Agilent Inductively Coupled Plasma Mass Spectrometry (ICP-MS) is available in single quadrupole and triple quadrupole configurations. Our single quadrupole ICP-MS address the range of typical ICP-MS measurements from routine, regulated analysis to advanced research and demanding applications. Our triple quadrupole ICP-MS will give you the confidence of knowing you can resolve problematic interferences – even in your most difficult samples – delivering results you know you can trust.

Catalog No. Product Net Price
AGIL0101-1535 Hydrogen gas regulator, two-stage, brass body, PTFE seals, stainless-steel diaphragms, 3000 psig inlet, 15 psig outlet, suits ICP-MS, Available in US only. CGA580 inlet with maximum pressure 3000 psig, outlet pressure 15 psig with 30 psig gauge, 1/8 inch 446 
Add to Cart
  • UNSPSC Code
  • 41113000
AGIL0101-1537 Oxygen gas regulator, two-stage, brass body, PTFE seals, stainless-steel diaphragms, 3000 psig inlet, 15 psig outlet, suits ICP-MS, Available in US only. CGA580 inlet with maximum pressure 3000 psig, outlet pressure 15 psig with 30 psig gauge, 1/8 inch Sw 446 
Add to Cart
  • UNSPSC Code
  • 41113000
G3280-60160 Tubing and filter for Argon supply to instrument, for Agilent ICP-MS with x-lens. Includes Nylon tubing (5 m) with fittings and connector (p/n 5063-9132), fiber membrane gas filter (p/n G1820-80341). Suitable for 7700, 7800, 7850, 7900, 8800 with x-lens. 512 
Add to Cart
  • Length
  • 5 m
  • UNSPSC Code
  • 41115411
  • Tubing Material
  • Nylon
  • Where Used
  • Argon gas
G3280-67023 Tubing for plasma and auxiliary gas inside torch box, black with inner sleeve, 1pc tubing for each. Suitable for 7700/8800 ICP-MS. Used to connect plasma and auxillary Argon gas to torch. Requires connectors for plasma/aux G1820-65027 - not included. 54 
Add to Cart
  • UNSPSC Code
  • 41115411
  • Where Used
  • Argon gas
AGIL9910062000 Gas-liquid separator VGA 77P for ICP 859 
Add to Cart
  • UNSPSC Code
  • 41115411
AGIL0100-0542 Tee, 1/8 in, stainless steel 71 
Add to Cart
  • UNSPSC Code
  • 41115717
  • Ferrule Type
  • Stainless Steel
G3138-65128 Peristaltic pump tubing for ISIS, Ismaprene, 2-stop, orange/purple tabs, 2.54 mm id, 1 pack of 6 pcs. For use with ISIS on Agilent 7700, 8800 ICP-MS 185 
Add to Cart
  • Inner Diameter (ID)
  • 2.54 mm
  • UNSPSC Code
  • 41115411
  • Chemical Compatibility
  • Aqueous HF acid Strong acids
  • Flared
  • No
  • Number of Stops
  • 2
  • Stop Color
  • Orange/Purple
  • Tubing Material
  • Ismaprene
G3138-65131 ISIS Separator gas chamber, for hydride generation accessory. Suitable for use with Agilent 7700 and 8800 with integrated sample introduction system (ISIS) Special offer 
Add to Cart
  • UNSPSC Code
  • 41115411
G3138-65138 ISIS tubing for gas line, PTFE, 3 mm id, 4 mm od, 5 m length. Used on Agilent 7700, 8800 with ISIS switching valve 103 
Add to Cart
  • Inner Diameter (ID)
  • 3 mm
  • Length
  • 5 m
  • UNSPSC Code
  • 41115411
  • Tubing Material
  • PTFE
  • Tubing OD
  • 4 mm
  • Where Used
  • ISIS
AGIL9910062200 ICP hydride module VGA 77. A separate hydride module should be used exclusively for Hg determinations to reduce cross contamination 2300 
Add to Cart
  • UNSPSC Code
  • 41115411

Overview

ICP-MS system operates with an ICP-MS Nebulizer, in which a high velocity Argon gas stream meets a liquid stream causing filmwise breakup of the solution into a fine aerosol. The aerosol particle size should ideally be sub-10µm with a narrow particle size distribution to achieve efficient atomization and ionization. Agilent offers a comprehensive range of ICP-MS nebulizers and supplies to solve any ICP-MS analysis challenge.

The portfolio includes standard glass concentric nebulizer (MicroMist), quartz and inert PFA nebulizers (MicroFlow and C-Flow), as well as robust Mira Mist PEEK or PTFE for high TDS samples and low-flow self-aspirating or total consumption nebulizers for your clinical or limited volume samples. ICP-MS nebulizer support is provided with a full range of accessories for all models including nebulizer cleaning tools.


The ICP torch is used to form, shape, and sustain an argon plasma which atomizes and ionizes the sample aerosol. Agilent ICP-MS Torches with Shield Torch System (STS) provide precise ion energy control, ensuring high sensitivity and stability, even in cool plasma mode for effective interference removal (ArO+).

Our portfolio is comprised of a wide range of ICP torches for your specific ICP-MS configuration. One-piece quartz torches offer the best stability and ease of use. The large 2.5mm injector on the standard torch gives maximum robustness and lowest matrix interferences for the best plasma stability. Single-piece torches with narrow bore injectors (1.0mm or 1.5 mm) are designed for use with organic solvents, to reduce plasma loading and improve plasma stability. Optional semi-demountable quartz torches with removable platinum or sapphire injectors are also available for use with the PFA inert sample introduction kit.


Resources