In stock
Agilent Technologies AGIL990967-902
ZORBAX Eclipse XDB-C18, 80Å, 4.6 x 250 mm, 5 µm, 400 bar pressure limit
706 /Each
Agilent Technologies AGIL880975-902
ZORBAX StableBond C18, 4.6 x 250 mm, 5 µm, 400 bar. 80Å, 400 bar pressure limit.
711 /Each
Agilent Technologies AGIL880975-912
ZORBAX StableBond Phenyl, 4.6 x 250 mm, 5 µm, 400 bar. 80Å, 400 bar pressure limit.
Agilent Technologies AGIL588925-902
TC-C18(2), 170Å, 4.6 x 250 mm, 5 µm, 400 bar pressure limit
373 /Each
Thermo Fisher Scientific Inc. THM50118911
Cimarec™ 40M Controllers
Special offer /Each
PerkinElmer Inc. 15N291-EC8
Epic C8 LC Columns - 250 mm, 30 mm I.D., 5 μm
3520 /Each
Agilent Technologies AGIL7910044500
Spare fully demountable torch body, for radial 700, Vista, and Liberty Series ICP-OES
2299 /Each
Agilent Technologies AGIL858700-906K
ZORBAX RRHD StableBond C8, 2.1 x 100 mm, 1.8 µm, 1200 bar, MVK, 3/pk. Method validation kit, includes three columns (p/n 858700-906) from three different lots
2264 /Each
Thermo Fisher Scientific Inc. THM85290073
EPROM-PK131R
23 /Each
Bio-Rad Laboratories, Inc. BR12004418
ZE5™ DI Water Containers
83.7 /Each
Agilent Technologies G1833-65404
ICP-MS lens polishing paper, 5 sheets each of waterproof polishing paper number 400 and 1200. Used for maintenance of Agilent ICP-MS lenses to wet polish surface in order to remove deposits
128 /Each
Agilent Technologies AGIL8003-0482
PerkinElmer, Connector, low-dead-volume, PEEK, for type A/C/K concentric nebulizers, requires 0.062 inch (1.6 mm) od tubing. Suitable for ELAN 9000/6xX00/DRC and NexION
138 /Each
Thermo Fisher Scientific Inc. THM28102-054630
Hypersil™ BDS C18 Column, 4.6 × 50 mm, 2.4 μm
626 /Each
Agilent Technologies G8494-60005
Rinse (10 L) and waste (20 L) container kit for AVS 6/7. Rinse and waste container kit for AVS 6/7. Includes 10 L HDPE container for rinse solution and 20 L HDPE container for waste. Both fitted with safety caps, and weighted supply lines fitted to ensure
682 /Each
Agilent Technologies G8400-60625
Skimmer base, brass, optional for Agilent 7900 with x-lens ICP-MS. Use with platinum-tipped skimmer cone. Includes screws
556 /Each
Agilent Technologies G3138-65103
ISIS Joint Holder for ISIS Pump. Suitable for use with Agilent 7500, 7700 and 8800 with integrated sample introduction system (ISIS)