Agilent Technologies     G8479-68100

MSIS reagent tubing kit. Includes O-rings for nebulizer bushing (1 pair), tubing connectors for reagent/sample inlets, capillary tubing (0.01 inch id x 0.03 inch od) to join to peristaltic pump tubing for reduction inlet.

35 /Each

Agilent Technologies     AGIL6610030700

Calibration mix majors for AA and ICP-OES; 125 mL, contains 500 mg/L Ca, Fe, K, Mg and Na in 5 % HNO3

321 /Each

Agilent Technologies     G8479-68001

Accessory kit to adapt the Multimode Sample Introduction System (MSIS) for use with Agilent 700 and Vista Series radial ICP-OES. Kit includes mounting bracket with screws and washers, glass transfer tube with ball joint connection, clamps for ball joint,

1183 /Each

Agilent Technologies     G8410-80120

Replacement nipple, polyvinylidene difluoride, 5 mm id. For outlet waste from rinse station of Agilent SPS 4 autosampler

11 /Each

Agilent Technologies     G8479-20020

MSIS nebulizer bushing, with O-rings

194 /Each

Thermo Fisher Scientific Inc.     THM50010969

WIRE-MESH SHELF

375.84 /Each

Agilent Technologies     AGIL5190-9766

ICH/USP target elements standard A, Hg 30 µg/mL, As 15 µg/mL, Cd and Pb 5 µg/mL in 2 % HNO3, 100 mL

120 /Each

Nacalai Tesque Inc.     COSM39361-19

COSMOSIL Column Prefilter

109 /Each

Agilent Technologies     AGIL3710068900

Peristaltic pump tubing, PVC, 2 tabs, black/white, 3.18 mm id), for aqueous samples, suitable as tubing to pump waste from MSIS, 12/pk

52 /Each

Agilent Technologies     AGIL8003-0953

Nebulizer adaptor, 16/6, for spray chambers with bung fitting for the nebulizer, not compatible with spray chambers that use the Helix seal

225 /Each

Agilent Technologies     G8479-60100

MSIS drain tube assembly. Includes 0.2 m length of 1/8 in ID drain tubing with bushing for waste outlet plus barb adapter and a single peristaltic pump tube, 2 bridged PVC with black/white tabs

31 /Each

Agilent Technologies     CP913777

Sample inlet tubing for inert Mira Mist nebulizer used with ICP-OES/ICP-MS. Fitted with 0.5 m of 0.018 inch id x 0.044 inch od tubing with threaded fitting to connect directly to nebulizer body.

137 /Each