In stock
Regis Technologies, Inc. REG1-790315-300
Celeris 2EP - 5 µm, 100Å, 5 cm x 3.0 mm ID
538 /Each
Agilent Technologies AGIL5013-0002
Capillary kit for 2 position/10 port switching valve bio
2346 /Each
Waters Corporation WATS-186007606
Torus Diol (OH) Column, 130Å, 1.7 µm, 2.1 mm X 75 mm, 1/pk
900 /Each
Agilent Technologies AGIL5023-1527
ISIS 3, Black Flangeless fitting, 1/8 inch, for 2.18 mm id sample loop, 5/pk. With black PP nut and collapsible PCTFE ferrule. Suitable for use with ISIS3 on 7900 and 8900 ICP-MS. Connects to ISIS valve from sample loop (2.18 mm id)
24 /Each
Agilent Technologies G1820-65531
ISIS-DS Sample uptake tubing, PFA with PEEK guide, 0.3 mm id, 1.6 mm od, 70 cm, 5/pk. Suitable for ISIS-DS used with Agilent 7500 ICP-MS
598 /Each
Agilent Technologies G3160-80065
Sample Tray F for Agilent Integrated Autosampler (I-AS), with 15 positions for 48 mm od vials. Polypropylene (PP) sample rack. Order suitable 48 mm od x 55 mm tall vials seperately. Ideal for use in semi-conductor applications.
847 /Each
MACHEREY‑NAGEL MN726296.30
GC column, Polar, OPTIMA WAX, 30 m L, 0.32 mm ID, 0.5 µm df
Special offer /Each
Agilent Technologies AGIL3710025400
tubing, clear, PVC, cap to SPS probe, 1 mm, 1/pk. Used to connect capillary to probe on SPS autosampler.
4 /Each
Waters Corporation WATS-186002556
SunFire C18 Column, 100Å, 5 µm, 4.6 mm X 30 mm, 1/pk
648 /Each
Agilent Technologies G3280-60580
ICP-MS organic solvent sample introduction kit, for Agilent 7700, 7800, 7850, 7900, 8800, 8900. Replaces the standard quartz torch, sample introduction and drain parts with those suitable for analysis of volatile organic solvents. Includes quartz torch wi
2757 /Each
Agilent Technologies G1833-67024
Strainer for cooling water for Agilent ICP-MS
193 /Each
Agilent Technologies G8014-60023
Top seal for fully and semidemountable torches, 3/pk. For use with Agilent 5100/5110 and 5800/5900 ICP-OES instruments. This seals the outer-tube set to the torch base.
18 /Each