- 
				    
					
Bacterial Endotoxins
					Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
					
				 
								- 
				    
					
Bacterial Retention
					Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
					
				 
								- 
				    
					
Cartridge Nominal Length
					30 in. (75 cm)
					
				 
								- 
				    
					
Catalogue Number
					KHGEG3TTT1H
					
				 
								- 
				    
					
Chemistry
					Hydrophilic Polyethersulfone (PES)
					
				 
								- 
				    
					
Device Material
					Polypropylene/Polysulfone
					
				 
								- 
				    
					
Device Size
					30 in.
					
				 
								- 
				    
					
Diameter
					10.7 in. (4.2 cm)
					
				 
								- 
				    
					
Filtration Area
					30000 cm2
					
				 
								- 
				    
					
Good Manufacturing Practices
					These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
					
				 
								- 
				    
					
Housing Material
					Polypropylene (PP)
					
				 
								- 
				    
					
Indirect Food Additive
					All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
					
				 
								- 
				    
					
Inlet Connection
					Sanitary Flange
					
				 
								- 
				    
					
Inlet to Outlet Width
					15.2 cm (6.0 in.)
					
				 
								- 
				    
					
Key Applications
					Laboratory Filtration
					
				 
								- 
				    
					
Length
					30 in. (75 cm)
					
				 
								- 
				    
					
Material Package
					Double Easy-Open bag
					
				 
								- 
				    
					
Material Size
					1
					
				 
								- 
				    
					
Maximum Differential Pressure, bar (psid)
					Forward: 6.9 (100) intermittent @ 25 °C; 5.5 (80) @ 25 °C; 1.0 (15) @ 80 °C. Reverse: 2.1 (30) @ 25 °C, intermittent
					
				 
								- 
				    
					
Maximum Inlet Pressure (psig)
					80
					
				 
								- 
				    
					
Maximum Inlet Pressure, bar (psi)
					6.9 (100) intermittent @ 25 °C; 5.5 (80) @ 25 °C; 2.75 (40) @ 60 °C; 1.0 (15) @ 80 °C
					
				 
								- 
				    
					
Maximum Inlet Temperature
					25°C
					
				 
								- 
				    
					
Non-Fiber Releasing
					This product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
					
				 
								- 
				    
					
Outlet Connection
					Sanitary Flange
					
				 
								- 
				    
					
Outlet Connection Diameter
					1.5 in.
					
				 
								- 
				    
					
Oxidizable Substances
					Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥6 L
					
				 
								- 
				    
					
Pore Size
					0.5 / 0.2 µm
					
				 
								- 
				    
					
Seal Material
					Silicone (SI)
					
				 
								- 
				    
					
Sterility
					Non-Sterile
					
				 
								- 
				    
					
Sterilization
					Gamma compatible to 45 kGy; 3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable
					
				 
								- 
				    
					
Support Material
					Polyester
					
				 
								- 
				    
					
Trade Name
					Millipore Express®
					
				 
								- 
				    
					
Vent Cap Material
					Polypropylene (PP)
					
				 
								- 
				    
					
Wettability
					Hydrophilic
					
				 
								- 
				    
					
Width
					15.2 cm (6.0 in.)