KHVEG2TTT1H - Merck - Filters and Filtration - Chromatography - Lab supplies

: Catalog No. KHVEG2TTT1H

Part No. KHVEG2TTT1H
Supplier Merck KGaA

Gamma Compatible High Area Opticap® XLT 20 Millipore Express® SHR with prefilter 0.5 µm/0.1 µm 1-1/2 in. TC

Net Price

1604

Availability

4 weeks

PROPERTIES

Bacterial Endotoxins

Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Bacterial Retention

Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
Cartridge Nominal Length

20 in (50 cm)
Catalogue Number

KHVEG2TTT1H
Chemistry

Hydrophilic Polyethersulfone (PES)
Device Configuration

Capsule
Device Material

Gamma Stable Polypropylene/Polysulfone
Device Size

20 in.
Diameter

10.7 cm (4.2 in)
European Pressure Equipment Directive

EMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
Filtration Area

20000 cm²
Good Manufacturing Practices

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Housing Material

Polypropylene (PP)
Indirect Food Additive

All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Inlet Connection

Sanitary Flange
Inlet Connection Diameter

1.5 in
Inlet to Outlet Width

15.2 cm (6.0 in)
Key Applications

Laboratory Filtration
Length

20 in (50 cm)
Material Package

Double Easy-Open bag
Material Size

1
Maximum Differential Pressure, bar (psid)

Forward: 6.9 (100) intermittent @ 25 °C; 5.5 (80) @ 25 °C; 1.0 (15) @ 80 °C. Reverse: 2.1 (30) @ 25 °C, intermittent
Maximum Inlet Pressure (psig)

80
Maximum Inlet Pressure, bar (psi)

6.9 (100) intermittent @ 25 °C; 5.5 (80) @ 25 °C; 2.75 (40) @ 60 °C; 1.0 (15) @ 80 °C
Maximum Inlet Temperature

25 °C
Non-Fiber Releasing

This product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Outlet Connection

Sanitary Flange
Outlet Connection Diameter

1.5 in
Oxidizable Substances

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥4 L
Pore Size

0.5 / 0.1 µm
Seal Material

Silicone (SI)
Sterility

Non-Sterile
Sterilization

Gamma compatible to 45 kGy; 3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable
Support Material

Polyester
Trade Name

Millipore Express®
Vent Cap Material

Gamma stable polypropylene (PP)
Wettability

Hydrophilic
Width

15.2 cm (6.0 in)

DESCRIPTION

Genuine product