KTGRA10FF1 - Merck - Filters and Filtration - Chromatography - Lab supplies

: Catalog No. KTGRA10FF1

Part No. KTGRA10FF1
Supplier Merck KGaA

Aervent KTGR Opticap XL10 Capsule

Net Price

449

Availability

4 weeks

PROPERTIES

Bacterial Endotoxins

Aqueous extraction contains <0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Bacterial Retention

Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
Cartridge Nominal Length

10 in. (25 cm)
Catalogue Number

KTGRA10FF1
Chemistry

Polytetrafluoroethylene (PTFE)
Device Configuration

Capsule
Device Material

Polypropylene
Device Size

10 in.
Diameter

10.7 cm (4.2 in.)
European Pressure Equipment Directive

EMD Millipore Corporation certifies that this product complies with the European Pressure Equipment Directive, 2014/68/EU of 15 May 2014. This product has been classified under Article 4 § 3 of the Directive 2014/68/EU. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 4 § 3 of the Directive 2014/68/EU, this product does not bear the CE mark.
Filtration Area

0.65 m²
Gravimetric Extractables

The extractables level was equal to or less than 45 mg per 10-inch cartridge after 24 hours in a 70/30% IPA/water mixture at controlled room temperature.
Housing Material

Polypropylene (PP)
Inlet Connection

Sanitary Flange
Inlet Connection Diameter

3/4 in.
Inlet to Outlet Width

33.0 cm (13.0 in.)
Length

10 in. (25 cm)
Material Package

Double Easy-Open bag
Material Size

1
Maximum Differential Pressure, bar (psid)

Forward: 5.5 bar (80 psid) @ 25 °C; 1.0 bar (15 psid) @ 80 °C. Reverse: 4.1 bar (60 psid), intermittent
Maximum Inlet Pressure (psig)

80 psig
Maximum Inlet Pressure, bar (psi)

Forward - 5.5 bar (80 psi) @ 25 °C; 2.8 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C; Reverse - 4.1 bar (60 psi), Intermittent
Maximum Inlet Temperature

25 °C
Media

Aervent®
Non-Fiber Releasing

This product was manufactured with a PTFE membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Outlet Connection

Sanitary Flange
Outlet Connection Diameter

3/4 in.
Pore Size

0.2 µm
Seal Material

Silicone (SI)
Sterilization

30 autoclave cycles of 30 min @ 135 °C
Support Material

Polypropylene
Trade Name

Aervent®
USP Bacterial Endotoxins

Aqueous extraction contains <0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Vent Cap Material

Polypropylene (PP)
Wettability

Hydrophobic
Width

33.0 cm (13.0 in.)

DESCRIPTION

Genuine product