KPHLG2THH1 - Merck - Filters and Filtration - Chromatography - Lab supplies

: Catalog No. KPHLG2THH1

Part No. KPHLG2THH1
Supplier Merck KGaA

Opticap® Gamma Compatible XLT20 Durapore® 0.45 µm HB/HB without gauge port

Net Price

569

Availability

4 weeks

PROPERTIES

Bacterial Endotoxins

Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Cartridge Nominal Length

24.6 in. (62.5 cm)
Catalogue Number

KPHLG2THH1
Chemistry

Polyvinylidene Fluoride (PVDF)
Device Configuration

Capsule
Device Material

Polypropylene
Device Size

20 in.
Diameter

10.7 cm (4.2 in.)
Filtration Area

1.24 m²
Good Manufacturing Practices

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Gravimetric Extractables

The extractables level was equal to or less than 25 mg per capsule after 24 hours in water at controlled room temperature.
Housing Material

Polypropylene (PP)
Indirect Food Additive

All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Inlet Connection

Hose Barb
Inlet Connection Diameter

5/8 in.
Inlet to Outlet Width

62.5 cm (24.6 in.)
Length

24.6 in. (62.5 cm)
Material Size

1
Maximum Differential Pressure, bar (psid)

Forward: 4.1 bar (60 psid) @25 ˚C. Reverse: 2.1 bar (30 psid) @ 4-40 °C
Maximum Inlet Pressure (psig)

80 psig
Maximum Inlet Pressure, bar (psi)

5.5 bar (80 psi) @ 23 °C; 2.8 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
Maximum Inlet Temperature

25 °C
Media

Durapore®
Non-Fiber Releasing

This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Outlet Connection

Hose Barb
Outlet Connection Diameter

5/8 in.
Oxidizable Substances

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥3000 mL
Pore Size

0.45 µm
Seal Material

Lead O-ring: Silicone-coated EPDM, Outer O-ring: Silicone
Sterility

Gamma
Sterilization

Gamma compatible to 40 kGy. 3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable
Support Material

Polyester/Polyethylene
Trade Name

Opticap®
USP Bacterial Endotoxins

A sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Vent Cap Material

Polypropylene (PP)
Wettability

Hydrophilic
Width

62.5 cm (24.6 in.)

DESCRIPTION

Prefiltration / Bioburden reduction in single use assemblies Bioburden reduction before final sterilization Process protection of intermediate consumables esp. in Plasma / Vaccine / r-Protein