A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Bacterial Retention
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
Catalogue Number
MPGL04001
Chemistry
Polyvinylidene Fluoride (PVDF)
Device Configuration
Capsule
Diameter
1/4 in.
Fitting Outlet
Hose barb
Good Manufacturing Practices
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Gravimetric Extractables
The extractables level was equal to or less than 1.5 mg per device after 24 hours in water at controlled room temperature.
Inlet Connection
NPT
Inlet Connection Diameter
1/4 in.
Material Size
1
Media
Durapore®
Non-Fiber Releasing
This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Outlet Connection
Hose Barb
Outlet Connection Diameter
1/4 in.
Overview
Millipak® membrane filters are best-in-class proven products to provide particulate-free and bacteria-free water at the point of dispense of a water purification system. Purified water filtered through a Millipak® 40 filter can be used for any laboratory work where water free of bacteria and/or particulates is needed. This filter is connected to the outlet of the water delivery point, such as the PODs of Milli-Q® water purification systems. The filter can be easily fitted and replaced. For use with Alpha-Q and Milli-Q® Academic / Biocel / Element / Synthesis / Plus / Gradient systems
Pore Size
0.22 µm
Trade Name
Millipak®
USP Bacterial Endotoxins
A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Wettability
Hydrophilic
DESCRIPTION
• 0.22 µm membrane filter for particulate- and bacteria-free water at the point of dispense• For Alpha-Q and Milli-Q® Academic/Biocel/Element/Synthesis/Plus/Gradient systems
+852-3069 6950
sales@gugent.com.hk
